minisatip.org

So I made some progress in testing. minisatip -j 0:0-975,1:1-1025,2:2-1075,3:3-1125,4:5-1175,5:5-1225,6:6-1275,7:7-1325 -f -l dvb With this line I have come so far that I can address all tuners. Unfortunately this only works if enigma2 is not running. If I leave out the first tuner at Minisatip, i.e...

I have a lot of patience and I like testing. But sometime I give up, because it is easier to buy a SAT card for the PC. I have a JESS LNB 1Freq 975, 2Freq 1025, 3 Freq 1075 ./minisatip -e 1-3 -j 1:0-975 , 2:0-1025 , 3:0-1075 -f -l http that should at least work? Because I don't have pins, I don't ne...

we're gonna start over from scratch: newly installed openatv on a VU+ uno 4k Unicable Jess LNB with 24 slots The tuners are set up. 8 tuners with the first 8 SCR With the VU+ on enigma2 I can use all 8 tuners, record 1 show watching others. Then: opkg update opkg upgrade opkg install minisatip then ...

Hello, Cata, as I already wrote I watch TV with the receiver perfectly, I emphasize again that the tuners are configured with UnicableII/Jess. Maybe this is a problem. I have now once again normal on the receiver a FTA channel run, then via web interface and VLC another 3 channels, on different tran...

i have tested several more times, but today i only had one picture, also this one was full of hooks and sticks. I see in TVH that he is trying one tuner after the other, but nowhere a signal is coming. As I said only once. I also did another test with init 4, shut down the Enigma 2, result was the s...

ok, i think you mean /var/log/messages? I have with enigma2 and after them
i stopped enigma2 with init 4 and tested again. Result the same

i have updated to openatv 6.4 once again, but it remains the same. The minisatip log shows me continuity error. Under Enigma2 I don't have these errors, Signal is good , is there anything I can do? Again my setup, I have a Unicable2 setup, on this cable is an Octupus Net with 2 tuners. It works with...

Thanks, it's basically working now, but: it's "stuck" all the time. In the tvheadend get me error messages... 2020-04-07 22:00:48.744 TS: Astra/11362H/ZDF HD: DVBSUB @ #6131 Continuity counter error (total 90) 2020-04-07 22:00:50.694 TS: Astra/11362H/ZDF HD: MPEG2AUDIO @ #6123 Continuity c...

I have now invested a few more hours. I'm now adding logs from minisatip to Enigma2. In the tvheadend I see the following error message: Apr 7 12:17:07 transcode tvheadend[20798]: satip: SAT>IP DVB-S Tuner #8 (192.168.188.26@UDP) - RTSP cmd error 7 (DONE) [8-404] Apr 7 12:17:09 transcode tvheadend[2...

Hello, as I wrote, on enigma everything is ok, I can watch several channels at the same time, on several tuners, I can also see the signal under Enigma2 If I want to access the tuners with tvheadend I don't see any signal in the webinterface of minisatip and there is no signal coming in tvheadend. W...