Digibit R1 + dreambox 920

Support forum for minisatip
typasek
Posts: 12
Joined: Sun Jan 13, 2019 4:33 pm

Re: Digibit R1 + dreambox 920

Post by typasek » Sat May 11, 2019 9:56 am

I found problem... I have two tuners in DM920 - BCM45208 and BCM45308 ... when I disconnected BCM45308 .. satip start working... But now I don't know if it is problem in satipclient or in dreamos(because I tried lot of images)...

typasek
Posts: 12
Joined: Sun Jan 13, 2019 4:33 pm

Re: Digibit R1 + dreambox 920

Post by typasek » Sat May 11, 2019 2:10 pm

answer from developer
"
No Chance. When you use a dm920 with two fbc tuners it is not possible to use vtuners... but vtuners are needed for satip client.
This is a limitation of the hardware, the drivers, and last but not least the linux tv api which supports a max of 16 tuners.
Each FBC Tuner create 8 frontend devices... so with two fbc tuners you reached the limit.
"
Cata maybe you can put this to minisatip faq :)

cata
Site Admin
Posts: 539
Joined: Tue May 12, 2015 1:01 am

Re: Digibit R1 + dreambox 920

Post by cata » Sat May 18, 2019 11:58 pm

From the log it seems mijisatip is tuning but does not get any signal. So you use unicable?

Post Reply