VLC, Audio issue DVB-S, pid=all works, select pids does not

Support forum for minisatip
sardonis
Posts:20
Joined:Sat Jun 17, 2017 7:10 pm
Re: VLC, Audio issue DVB-S, pid=all works, select pids does not

Post by sardonis » Wed Mar 25, 2020 4:02 pm

Are you using a CI(+) module for encrypting? Maybe something goes wrong with decrypting the ADTS stream?

https://www.dvbviewer.tv/forum/topic/61 ... aac-audio/

9000h
Posts:82
Joined:Tue May 12, 2015 1:49 pm

Re: VLC, Audio issue DVB-S, pid=all works, select pids does not

Post by 9000h » Wed Mar 25, 2020 10:59 pm

Hi,
I do not use a CI or CI+
with VLC there is no audio, but mpv did play it fine
rtsp://192.168.178.129/?src=1&freq=12187&pol=h&ro=0.35&msys=dvbs&mtype=qpsk&plts=off&sr=27500&fec=34&pids=167,136

so it still looks like a client side issue
CU
9000h

User220320
Posts:7
Joined:Sun Mar 22, 2020 10:53 am

Re: VLC, Audio issue DVB-S, pid=all works, select pids does not

Post by User220320 » Tue Apr 07, 2020 7:28 am

Same here, mpv did play it with audio, VLC didn't.
I'll continue my research in the VLC community.
Thank you for taking your time :)

Post Reply