minisatip binaries

Support forum for minisatip
cata
Site Admin
Posts: 694
Joined: Tue May 12, 2015 1:01 am

Re: minisatip binaries

Post by cata »

Basically if you have both Diseqc 1.1 and 1.0 the mapping from src= parameter to the actual position is different. See here: https://github.com/catalinii/minisatip/ ... dvb.c#L479

If LNB1 is your first port in the diseqc 1.1 switch, src=2 will map to position 1 in diseqc 1.1 switch and position input 2 in diseqc 1.0 switch. Then src=5 will map to position 2 in diseqc 1.1 switch and then src=9 will map to position 3 in diseqc 1.1.

Also if you want to send diseqc 1.1 first (as is the first switch) you need to use -d 0:1-2
atari
Posts: 11
Joined: Wed Aug 21, 2019 3:17 pm

Re: minisatip binaries

Post by atari »

is there bin for ppc whit enigma enabled?
cata
Site Admin
Posts: 694
Joined: Tue May 12, 2015 1:01 am

Re: minisatip binaries

Post by cata »

Hey
No binary for ppc enigma2.
Is possible to compile using a cross compiler for ppc.
https://github.com/catalinii/minisatip/ ... es.yml#L19
Post Reply