Support forum for minisatip
-
TheTroll
Post
by TheTroll »
Hi,
are the diseqc commands supported by minisatip.
I have a diseqc with 1 to 8 outputs, can I use minisatip with it?
Thanks a lot
-
TheTroll
Post
by TheTroll »
In my comment I meant Diseqc 1.1 of course
-
catalinii
- Posts: 0
- Joined: Wed Nov 18, 2015 5:41 am
Post
by catalinii »
Hi,
yes diseqc 1.0 (at least is supported) and the code allows just for 4 outputs.
I know diseqc 1.1 allows up to 16 different outputs, do you use more than 5 lnb connected to it ?
Currently uncommited diseqc message is not sent, but I can change that easily in the next commit and let me know how it works.
Thanks
-
TheTroll
Post
by TheTroll »
Hi,
what I use is a diseqc 1.1 with 8 inputs and 1 output.
This is direct 1.1 mode (so uncommited?) where i can control lnb from 1 to 8.
It would be so great if you could add an option to select among:
- diseqc 1.0
- diseqc 1.0+1.1
- diseqc 1.1
Thanks a lot in advance!
-
catalinii
- Posts: 0
- Joined: Wed Nov 18, 2015 5:41 am
Post
by catalinii »
Do you have some tool that works with your switch ?
All I could find on a quick search was commited (1.0) and uncommited (1.1).
Thanks
-
TheTroll
Post
by TheTroll »
Well my enigma2 box does
I guess tvheadend as well!
What i need in my case is pure uncomitted command, can you quickly implement it ? its just an index.
Thanks!!
-
catalinii
- Posts: 0
- Joined: Wed Nov 18, 2015 5:41 am
Post
by catalinii »
Yeah I have added the uncommited support to the next commit.
-
TheTroll
Post
by TheTroll »
Cool!
Can it be setup from command line?
when will you push?
I can test a patch ?
-
catalinii
- Posts: 0
- Joined: Wed Nov 18, 2015 5:41 am
Post
by catalinii »
It will use src= parameter from the URL to set the diseqc input, so no command line.
Probably this week/ early next week.
I need to check what I did last time as I was away for a week.
Thanks
-
TheTroll
Post
by TheTroll »
But how will it decide if it needs to send 1.0 or 1.1?
I use the mipsel version for vu+ btw
thx