Page 5 of 5

Re: #150: Diseqc 1.1 support

Posted: Wed Jul 22, 2020 6:16 pm
by suppenkasper
Hey guys,

I also use an Enigma2 Box (Octagon SF8008) and want to use it for SAT>IP via Minisatip for my TVHeadend-Server. Unfortunately it doesn't work proper or doesn't use the DiseqC-Satellites. When it works, it only works on Astra 19.2°E or Option A in DiseqC. I have actually 5 positions to use:

1: Astra 19.2°E
2: Hotbird 13°E
3: Astra 23.5°E
4: Astra 28.2°E
5: Eurobird 9°E

and maybe some more on the second DiseqC switch in the future. May you please let me know how to configure or start the minisatip in the correct order?

I tried with this line but doesn't work:

Code: Select all

minisatip -N --satip-xml http://192.168.178.200:8554 -R /usr/share/minisatip/html -d 0:1-1
[\code]

also it dosn't work with that:

[code]
minisatip -N --satip-xml http://192.168.178.200:8554 -R /usr/share/minisatip/html
[\code]

Re: #150: Diseqc 1.1 support

Posted: Sat Jul 25, 2020 2:12 am
by cata
Hi,

can you try: -d 0:0-1

This should work if you have a diseqc 1.1 splitter.

Thanks

Re: #150: Diseqc 1.1 support

Posted: Wed Sep 02, 2020 7:25 pm
by suppenkasper
Hi guys,

I would also appreciate if someone would help or explain a setup with DiseqC 1.1 with 8+ Satellites... With my devices only Astra 19.2E works which is the first position on my equipment. Even DiseqC 1.0 doesn't work if I use this on my DCube R2 or Octagon SF8008 Satellite Receivers...

Thanks in advance and cheers guys!

Re: #150: Diseqc 1.1 support

Posted: Sat Sep 05, 2020 7:30 pm
by cata
If you have both diseqc 1.1 and 1.0 then you need to set -d 0:1-1 .

Please add for all adapters -d, eg -d X:1-1 or -d X:0-1 for diseqc 1.1 only.