Minisatip Test on Vuplus (gigablue Binaries)

Support forum for minisatip
Post Reply
vento
Posts: 41
Joined: Wed Mar 09, 2016 4:52 pm

Minisatip Test on Vuplus (gigablue Binaries)

Post by vento »

Hi, here my minisatip log after installing minisatip on a vusolo2 to usr/bin.
The server vusolo2 ist starting and was found by DVBviewer on a PC, but no picture is shown. I have another Satip server running on BM2LTS and netceiver. Here im getting a good picture.
MINISATIP LOG VUSOLO2:
[20/03 04:34:06.843 main]: minisatip version 0.5.40, compiled with s2api version: 0504

Code: Select all

[20/03 04:34:06.843 main]: Built with dvbcsa
[20/03 04:34:06.844 main]: Built with dvbapi
[20/03 04:34:06.844 main]: Built with AES (OpenSSL)
[20/03 04:34:06.844 main]: Built with tables processing
[20/03 04:34:06.844 main]: Built with satip client
[20/03 04:34:06.844 main]: Built with linux dvb client
[20/03 04:34:06.844 main]: Built with backtrace
[20/03 04:34:06.844 main]: Built without netceiver
[20/03 04:34:06.905 main]: Could not open /dev/dvb/adapter0/frontend0 in RW mode (fe: -1, dvr: 7)
[20/03 04:34:07.011 main]: Could not open /dev/dvb/adapter0/frontend2 in RW mode (fe: -1, dvr: 9)
[20/03 04:34:07.062 main]: Could not open /dev/dvb/adapter0/frontend3 in RW mode (fe: -1, dvr: 9)
[20/03 04:34:07.062 main]: Could not open /dev/dvb/adapter0/frontend4 in RW mode (fe: -1, dvr: 9)
[20/03 04:34:07.063 main]: Could not open /dev/dvb/adapter0/frontend5 in RW mode (fe: -1, dvr: 9)
[20/03 04:34:07.064 main]: Could not open /dev/dvb/adapter0/frontend6 in RW mode (fe: -1, dvr: 9)
[20/03 04:34:07.064 main]: Could not open /dev/dvb/adapter0/frontend7 in RW mode (fe: -1, dvr: 9)
[20/03 04:34:07.065 main]: Could not open /dev/dvb/adapter0/frontend8 in RW mode (fe: -1, dvr: 9)
[20/03 04:34:07.065 main]: Initializing with 1 devices
[27/03 07:29:12.805 main]: minisatip version 0.5.40, compiled with s2api version: 0504
[27/03 07:29:12.805 main]: Built with dvbcsa
[27/03 07:29:12.805 main]: Built with dvbapi
[27/03 07:29:12.805 main]: Built with AES (OpenSSL)
[27/03 07:29:12.805 main]: Built with tables processing
[27/03 07:29:12.805 main]: Built with satip client
[27/03 07:29:12.805 main]: Built with linux dvb client
[27/03 07:29:12.806 main]: Built with backtrace
[27/03 07:29:12.806 main]: Built without netceiver
[27/03 07:29:12.808 main]: tcp_listen: failed: bind() on address: ANY, port 554 : error Address already in use
[27/03 07:29:12.809 main]: RTSP: Could not listen on port 554
I know this version will not support the netceiver just share the Tuners of the box. Maybe im getting no picture because the port is in use by BM2lTS?

Kindly
Vento
cata
Site Admin
Posts: 768
Joined: Tue May 12, 2015 1:01 am

Re: Minisatip Test on Vuplus (gigablue Binaries)

Post by cata »

Yeah the port is in use by another process. also the dvb tuners are open by another process.
vento
Posts: 41
Joined: Wed Mar 09, 2016 4:52 pm

Re: Minisatip Test on Vuplus (gigablue Binaries)

Post by vento »

Hi,
is it possible to specify another port for the sat>ip server or is that a definition of the SAT>IP Protocol? Ist ist also possible to have multiple SAT>IP Server in the same network?

kindly
Vento
cata
Site Admin
Posts: 768
Joined: Tue May 12, 2015 1:01 am

Re: Minisatip Test on Vuplus (gigablue Binaries)

Post by cata »

Yes and yes.

Parameter is -y but your client needs to know about the non default port.
s25a
Posts: 19
Joined: Sun Jun 05, 2016 1:49 pm

Re: Minisatip Test on Vuplus (gigablue Binaries)

Post by s25a »

Hi,

@Vento: I saw you have compiled a version for VUPLUS, right? Sid it work for you finally. Maybe if you don't mind can you share or write how you compiled it? I could start the minisatip server (Gigablue Binary) from another post but only have a black screen on DVBVIewer and TVHEadend.

Thanks

S
vento
Posts: 41
Joined: Wed Mar 09, 2016 4:52 pm

Re: Minisatip Test on Vuplus (gigablue Binaries)

Post by vento »

Here Some Self compiled versions of minisatip without netceiver support, Runs fine on a vusolo2, getting a good picture in PC DVB Viewer client.
Put in usr/bin reboot Start with (make executable)

Code: Select all

minisatip -f -l -o 127.0.0.1:9000 
Sorry the Binaries are to big, please follow the link and test the files, 3 versions of the same. Please rename the file to minisatip (there are 3 versions, first one is working fine, JUST REMOVE THE ZIP from Filename, dont need to unzip) https://www.vuplus-support.org/wbb4/ind ... ost1326739

Just still trouble with parameter -o, but no problems with free TV.

Kindly
Vento
s25a
Posts: 19
Joined: Sun Jun 05, 2016 1:49 pm

Re: Minisatip Test on Vuplus (gigablue Binaries)

Post by s25a »

Hi Vento - thanks a lot. I got it to work even with the binary from Cato. My mistake was that I only tested HD Channels and for what ever reason this does not work. I reported back to Cato already.

I also ordered a Gigablue REceiver to test that. Maybe there it is working

Thanks

S
Post Reply