How to use minisatip with CI/CAM?

Support forum for minisatip
Post Reply
jennix
Posts: 4
Joined: Sat Jul 16, 2016 4:00 pm

How to use minisatip with CI/CAM?

Post by jennix »

Hi @all,

if i understand it correctly it should be possible to use minisatip with DVB-cards and connected CI-slots. As an example: in my linux-box there are 4 DVB-S2-tuner (or more exactly there are 2 dual-dvb-s2-cards) and one CI-adaptor.

If i'm using all of these four tuners as sat>ip-devices is it possible to use this CI-adaptor with each of them? Or should i do some configuration to map the CI to one of these tuners? Or is the mapping already done in the OS and minisatip is using this mapping?

And how can i do the configuration for the inserted CAM?

Thanks, jennix
jennix
Posts: 4
Joined: Sat Jul 16, 2016 4:00 pm

Re: How to use minisatip with CI/CAM?

Post by jennix »

Nothing?
cata
Site Admin
Posts: 768
Joined: Tue May 12, 2015 1:01 am

Re: How to use minisatip with CI/CAM?

Post by cata »

Hi,

Are you talking about DD CI?

Thanks
jennix
Posts: 4
Joined: Sat Jul 16, 2016 4:00 pm

Re: How to use minisatip with CI/CAM?

Post by jennix »

Yes, i own two DD DVB-Cards and one DD CI and some Alphacrypt CAM's.

kind regards, Jens
cata
Site Admin
Posts: 768
Joined: Tue May 12, 2015 1:01 am

Re: How to use minisatip with CI/CAM?

Post by cata »

Hi,

Take a look here:
https://github.com/catalinii/minisatip/issues/126

Basically the independent mode does not work (or mtd ) but if you attach the CI to one card it should.
Mtd on the same transponder should be easy to add.
Thanks
Post Reply