Digibit: minisatip7 can´t tune some frequencies...

Support forum for minisatip
nickiman
Posts: 13
Joined: Fri May 12, 2017 9:06 pm

Re: Digibit: minisatip7 can´t tune some frequencies...

Post by nickiman » Thu Jun 15, 2017 10:34 pm

nickiman wrote:
Thu Jun 15, 2017 8:12 am
Because I´ve followed a recommendation for use minisatip7 in another forum...

I´m going to change the config file with your parameters and I´ll let you know...

Thank you very much Cata!
Hi again,
I´ve changed the parameters in /etc/sysconfig/config file. I´ve repeated the steps requested above:

Code: Select all

killall minisatip7
/sbin/minisatip7 -f -l -l -l -7 0:1,0:2,0:3 -L *:9750-10600-11700
This is the log that I get now: https://pastebin.com/raw/4QfDn1ts

But I can´t tune the frequency 11973V in the Digibit.

I´m wondering if I should increase some number in the parameters like the lnb_hight -10600 or lnb_switch -11700, maybe?

Keep waiting your comments.
Best regards.

cata
Site Admin
Posts: 584
Joined: Tue May 12, 2015 1:01 am

Re: Digibit: minisatip7 can´t tune some frequencies...

Post by cata » Fri Jun 16, 2017 3:25 am

Run
killall minisatip7;/sbin/minisatip7 -f -l -l -l -7 0:1,0:2,0:3 -L *:9750-10600-11700

And upload the logs again.

Thanks

nickiman
Posts: 13
Joined: Fri May 12, 2017 9:06 pm

Re: Digibit: minisatip7 can´t tune some frequencies...

Post by nickiman » Fri Jun 16, 2017 10:29 am

I´m always get the same output:

Code: Select all

~ # killall minisatip7
~ # /sbin/minisatip7 -f -l -l -l -7 0:1,0:2,0:3 -L *:9750-10600-11700
[16/06 10:28:57.390]: Setting adapter 0 as master for adapter 1
[16/06 10:28:57.390]: Setting adapter 0 as master for adapter 2
[16/06 10:28:57.390]: Setting adapter 0 as master for adapter 3
[16/06 10:28:57.390]: Setting diseqc adapter -1 lnb_low 9750000 lnb_high 10600000 lnb_switch 11700000
[16/06 10:28:57.392]: minisatip version 0.7.4-axe201, compiled with s2api version: 0501
[16/06 10:28:57.392]: Built without dvbcsa
[16/06 10:28:57.392]: Built without CI
[16/06 10:28:57.392]: Built with dvbapi
[16/06 10:28:57.392]: Built without AES (OpenSSL)
[16/06 10:28:57.392]: Built with tables processing
[16/06 10:28:57.392]: Built with satip client
[16/06 10:28:57.392]: Built with linux dvb client
[16/06 10:28:57.392]: Built with backtrace
[16/06 10:28:57.392]: Built without netceiver
[16/06 10:28:57.393]: Built for satip-axe
[16/06 10:28:57.394]: New UDP socket 3 bound to 0.0.0.0:1900
[16/06 10:28:57.394]: setting multicast for 239.255.255.250
[16/06 10:28:57.394]: New UDP socket 4 bound to 239.255.255.250:1900
[16/06 10:28:57.395]: tcp_listen: failed: bind() on address: ANY, port 554 : error Address already in use
[16/06 10:28:57.395]: RTSP: Could not listen on port 554
I´m doing something wrong?

cata
Site Admin
Posts: 584
Joined: Tue May 12, 2015 1:01 am

Re: Digibit: minisatip7 can´t tune some frequencies...

Post by cata » Fri Jun 16, 2017 11:56 am

You should write it as I did before with ;

nickiman
Posts: 13
Joined: Fri May 12, 2017 9:06 pm

Re: Digibit: minisatip7 can´t tune some frequencies...

Post by nickiman » Fri Jun 16, 2017 2:37 pm

cata wrote:
Fri Jun 16, 2017 11:56 am
You should write it as I did before with ;
OMG! Sorry... :oops: here´s the log:
https://pastebin.com/raw/JJZkKTVV

cata
Site Admin
Posts: 584
Joined: Tue May 12, 2015 1:01 am

Re: Digibit: minisatip7 can´t tune some frequencies...

Post by cata » Sat Jun 17, 2017 8:46 am

Can you check the lnb settings of the dvb app that works?

What cointry are you in? Are you using circular polarity?

nickiman
Posts: 13
Joined: Fri May 12, 2017 9:06 pm

Re: Digibit: minisatip7 can´t tune some frequencies...

Post by nickiman » Tue Jun 20, 2017 10:37 am

cata wrote:
Sat Jun 17, 2017 8:46 am
Can you check the lnb settings of the dvb app that works?
What do you mean? I´m using the Digibit R1 with tvheadend. You mean the configuration of tvheadend?
What cointry are you in? Are you using circular polarity?
I live in Spain. And not 100% sure but in my building there is an Universal LNB oriented to 19,2ºE which is distributed to all houses only the polarization Vertical Low.

cata
Site Admin
Posts: 584
Joined: Tue May 12, 2015 1:01 am

Re: Digibit: minisatip7 can´t tune some frequencies...

Post by cata » Sun Jun 25, 2017 5:06 am

I will try to recompile a minisatip version for you

cata
Site Admin
Posts: 584
Joined: Tue May 12, 2015 1:01 am

Re: Digibit: minisatip7 can´t tune some frequencies...

Post by cata » Mon Jun 26, 2017 12:15 pm

BTW, what is the highest frequency you can tune to ?

Thanks

cata
Site Admin
Posts: 584
Joined: Tue May 12, 2015 1:01 am

Re: Digibit: minisatip7 can´t tune some frequencies...

Post by cata » Mon Jun 26, 2017 12:16 pm

With your previous setup ?

Post Reply