CI+ protocol implementation in minisatip

Support forum for minisatip
solut
Posts: 14
Joined: Wed Jan 03, 2018 4:49 pm

Re: CI+ protocol implementation in minisatip

Post by solut » Fri Nov 01, 2019 8:04 pm

Hi Yuri,

I'm using two SatIP server with 4 tuners each, so I followed the minisatip documentation:
-e --enable-adapters list_of_enabled adapters: enable only specified adapters
eg: -e 0-2,5,7 (no spaces between parameters)
keep in mind that the first adapters are the local ones starting with 0 after that are the satip adapters if you have 3 local dvb cards 0-2 will be the local adapters, 3,4, ... will be the satip servers specified with argument -s
But I saw on the logs that u are right, the CIs are set after the SatIP devices...

SoI tried 8 and 9, switching the input of my CI adapter, but I didn't had any success.
Exactly the same bevaviour - the CAM get's initialized (CI+ is OK), but I get one time
found CW: 0
and then only
found CW: -1
What else can I try ?

Thanks, solut.

solut
Posts: 14
Joined: Wed Jan 03, 2018 4:49 pm

Re: CI+ protocol implementation in minisatip

Post by solut » Fri Nov 01, 2019 9:07 pm

It's working!
I deleted the bin files + bootid (?) and start minisatip with --ca-pin 8:xxxx (no ca assignment).

Thanks, solut.

Post Reply