minisatip for VU+ Ultimo 4K

Support forum for minisatip
cata
Site Admin
Posts: 768
Joined: Tue May 12, 2015 1:01 am

Re: minisatip for VU+ Ultimo 4K

Post by cata »

Hi,

add -l http

and upload the log.

thanks
kevinwitschi
Posts: 14
Joined: Wed Feb 08, 2017 2:12 am

Re: minisatip for VU+ Ultimo 4K

Post by kevinwitschi »

Thanks a lot, when i put -l http, the server starts and works. but i have trouble with access to camd.socket. i will try a bit so that the vu dvbapi and minisatip can connect together to camd.socket. And how i can get minisatip WebIF?

So i hope you are agreed when i upload this minisatip file to forums other people search for this file. Do you have an official account for donations?
9000h
Posts: 89
Joined: Tue May 12, 2015 1:49 pm

Re: minisatip for VU+ Ultimo 4K

Post by 9000h »

Hi,
looks like it's not only on x86 a issue
https://github.com/catalinii/minisatip/issues/372

CU
9000h
cata
Site Admin
Posts: 768
Joined: Tue May 12, 2015 1:01 am

Re: minisatip for VU+ Ultimo 4K

Post by cata »

Excep the -l issue you need html dorectory from github in the same directory with minisatip.

The donation link: https://www.paypal.com/cgi-bin/webscr?c ... ostedGuest

For now you can use network socket, /tmp/camd.socket is not fully tested.
kevinwitschi
Posts: 14
Joined: Wed Feb 08, 2017 2:12 am

Re: minisatip for VU+ Ultimo 4K

Post by kevinwitschi »

So i try a few days and i have a lot of problems.

- OSCam not work for me, the PIDs minisatip send to OSCam are empty like this: (dvbapi) Demuxer 1 trying to descramble PID 0 CAID 1801 PROVID 000000 ECMPID 0059 ANY CHID PMTPID 0000 VPID 0000

- When i record one programm of transponder and then i start record a second or third programm, i have always a lot of discont. errors in DVBViewer RS/MS. So i don't know why this happens, but i not have time to support this.

- So also other problems like not get any data when DVBViewer try to start a recording. (0.00MB, 0% Signal)

So the idea is great to develop a minisatip for the great VU+ Ultimo 4K STB. But not work for me, because i dont have time to setup. But much thanks to you for this great minisatip-axe for digibit r1. I use this a long time, because telestar was not able to support their hardware a long time. I hope one day minisatip on Ultimo 4K works so great too...
cata
Site Admin
Posts: 768
Joined: Tue May 12, 2015 1:01 am

Re: minisatip for VU+ Ultimo 4K

Post by cata »

Hi,

the only issue at this moment with VU is that sometimes you do not get any trafiic (maybe problem 3).

For issue 1, as long as minisatip connects to a socket (-o 127.0.0.1:9000 ) it should work. The network mode is improved in the last commit but still needs the following issue applied to oscam: http://www.streamboard.tv/oscam/ticket/4625#ticket

For discontinuity errors, make sure you are using rtsp over tcp especially if dvbviewer and VU are not in the same network or over a wireless link.

If you want I can help troubleshooting, but if you do not have time I understand.

Thank you
kevinwitschi
Posts: 14
Joined: Wed Feb 08, 2017 2:12 am

Re: minisatip for VU+ Ultimo 4K

Post by kevinwitschi »

Thanks for answers.

But i don't understand especially the problem, that i have much errors when i record one programm of transponder, like RTL Television and then i start later record VOX. So RTL have about 10 errors, VOX 0. Then i start record third programm, like RTL2, then RTL has 20 errors, VOX 10, RTL2 0. And so on.

So i try always to use TCP mode. I really hate UDP also because other issues. But i'am not sure that the "-O" parameter works in this version you provide me.

Also i can not start WebIF, i download the full folder html on github and put in the same folder like minisatip binary. But i can not connect to WebIF, i only can get the satipdesc.xml. Other http server not run.

So i will spend time fpr this, because your project of minisatip on ultimo 4k would me save a lot of money. So i like much more to donate the money i save because i not must buy much DVB>IP hardware, to you. But the device must 100% work, without any crashs. Like minisatip on digibit r1.

Maybe you have some more ideas.
kevinwitschi
Posts: 14
Joined: Wed Feb 08, 2017 2:12 am

Re: minisatip for VU+ Ultimo 4K

Post by kevinwitschi »

Here is the example:

Image

When i take DVBViewer Media Server as source, i can chose UDP or TCP.
But when i take your minisatip (with activated "-O" option) as source, there is no choice.
And when i force TCP (i chose DVBViewer MS, chose TCP and change ip from .111 to .11.) Then the picture is black.
cata
Site Admin
Posts: 768
Joined: Tue May 12, 2015 1:01 am

Re: minisatip for VU+ Ultimo 4K

Post by cata »

-l http,pmt -F /tmp/minisatip.log

Then provide /tmp/minisatip.log
kevinwitschi
Posts: 14
Joined: Wed Feb 08, 2017 2:12 am

Re: minisatip for VU+ Ultimo 4K

Post by kevinwitschi »

So i try again, first on DVB-S with RTL and ProSiebenSat1 Transponders. Same Problem, here the log: http://www.filehosting.org/file/details ... satips.log
Post Reply