Hi there
I'am totally desperate. So i buy on January a VU+ Ultimo 4K STB with 8xDVB-S2 and 8x DVB-C FBC-Tuners installed. So i can watch and record by use TS-Stream Device and DVBViewer Pro (and Media/Recording Service). But i have much crash.
So i think is the better way to run a minisatip Server on this magnificent Ultimo 4K Linux STB. But i try much binaries, like mips_gigablue_dvbcsa and mips_openwrt_dvbcsa or sh4, but not works. So i'am absolute linux dummy. I dont know about crosscompile and other things. Maybe anybody can compile a file with dvbcsa (Option "-o" must work ) to run on this STB?
I see for much other STBs like Dream Multimedia and other VU+ STBs binarys to sownload, but not for Ultimo 4K...
minisatip for VU+ Ultimo 4K
Re: minisatip for VU+ Ultimo 4K
Hi,
The vu 4k receivers have arm architecture and allows same binary to work on all 4k receivers. IF you do not find a binary for any receicer I can compile one that works.
Thanks
The vu 4k receivers have arm architecture and allows same binary to work on all 4k receivers. IF you do not find a binary for any receicer I can compile one that works.
Thanks
-
- Posts: 14
- Joined: Wed Feb 08, 2017 2:12 am
Re: minisatip for VU+ Ultimo 4K
Hi, i search much for any binaries. But all i find not work on my Ultimo 4K. I alsways get:
root@vuultimo4k:/var/volatile/tmp# ./minisatip
./minisatip: line 1: ELF: not found
./minisatip: line 2: syntax error: unexpected word
I dont know but i think its new architecture. So when you can compile with -o option, much thanks. Maybe you need telnet access to my VU STB?
root@vuultimo4k:/var/volatile/tmp# ./minisatip
./minisatip: line 1: ELF: not found
./minisatip: line 2: syntax error: unexpected word
I dont know but i think its new architecture. So when you can compile with -o option, much thanks. Maybe you need telnet access to my VU STB?
Re: minisatip for VU+ Ultimo 4K
http://minisatip.org/tmp/minisatip
But keep in mind there is a problem with scanning. It is recommended to scan before using minisatip on VU 4K.
Thanks
But keep in mind there is a problem with scanning. It is recommended to scan before using minisatip on VU 4K.
Thanks
-
- Posts: 14
- Joined: Wed Feb 08, 2017 2:12 am
Re: minisatip for VU+ Ultimo 4K
Hi, thanks a lot. i try now and it works. but i have much freezers. how i can activate tcp-mode. so the problems gone, i think.
But so oscam not works, what i do wrong?
root@vuultimo4k:/var/volatile/tmp# ./minisatip2 -f -l -l -l -o 192.168.52.111:49766
[13/07 01:32:03.481 main]: module -o not recognised
But so oscam not works, what i do wrong?
root@vuultimo4k:/var/volatile/tmp# ./minisatip2 -f -l -l -l -o 192.168.52.111:49766
[13/07 01:32:03.481 main]: module -o not recognised
-
- Posts: 14
- Joined: Wed Feb 08, 2017 2:12 am
Re: minisatip for VU+ Ultimo 4K
So i try a bit and now the cable-channels (dvb-c) works perfectly. but i cant get any dvb-s2 channels. so i have unicable/jess and try with and without the unicable frequencies, but always the same:
[13/07 02:47:54.275 main]: clearing filter on PID 5350 FD 13
[13/07 02:47:54.275 main]: adapter.c:838 Unlock disabled mutex 0x7e710
[13/07 02:47:54.275 main]: reply -> 7 (192.168.52.111:53356) CL:0 [sock_id 6]:
[13/07 02:47:54.416 signal]: BW 2KB/s, Total BW: 145 MB, ns/read 0, r: 1, w: 14 fw: 0, tt: 0 ms
[13/07 02:47:55.279 AD8]: no data sent for more than 1s sid: 0 for 192.168.52.111:52044
Message repeated 2 times
[13/07 02:47:58.247 signal]: get_signal_new took 24 ms for adapter 8 handle 10 (status: 7, ber: 0, strength:255, snr: 0,
max_strength: 18345, max_snr: 1 0)
[13/07 02:47:58.484 AD8]: no data sent for more than 1s sid: 0 for 192.168.52.111:52044
Message repeated 20 times
[13/07 02:48:21.275 main]: read RTSP (from handle 7 sock_id 6, len: 0, sid 0):
[13/07 02:48:21.275 main]: reply -> 7 (192.168.52.111:53356) CL:0 [sock_id 6]:
[13/07 02:48:21.426 AD8]: no data sent for more than 1s sid: 0 for 192.168.52.111:52044
Another question: is there no WebIF?
[13/07 02:47:54.275 main]: clearing filter on PID 5350 FD 13
[13/07 02:47:54.275 main]: adapter.c:838 Unlock disabled mutex 0x7e710
[13/07 02:47:54.275 main]: reply -> 7 (192.168.52.111:53356) CL:0 [sock_id 6]:
[13/07 02:47:54.416 signal]: BW 2KB/s, Total BW: 145 MB, ns/read 0, r: 1, w: 14 fw: 0, tt: 0 ms
[13/07 02:47:55.279 AD8]: no data sent for more than 1s sid: 0 for 192.168.52.111:52044
Message repeated 2 times
[13/07 02:47:58.247 signal]: get_signal_new took 24 ms for adapter 8 handle 10 (status: 7, ber: 0, strength:255, snr: 0,
max_strength: 18345, max_snr: 1 0)
[13/07 02:47:58.484 AD8]: no data sent for more than 1s sid: 0 for 192.168.52.111:52044
Message repeated 20 times
[13/07 02:48:21.275 main]: read RTSP (from handle 7 sock_id 6, len: 0, sid 0):
[13/07 02:48:21.275 main]: reply -> 7 (192.168.52.111:53356) CL:0 [sock_id 6]:
[13/07 02:48:21.426 AD8]: no data sent for more than 1s sid: 0 for 192.168.52.111:52044
Another question: is there no WebIF?
-
- Posts: 14
- Joined: Wed Feb 08, 2017 2:12 am
Re: minisatip for VU+ Ultimo 4K
I get the point now. So in my configuration the unicable input cable was on lower port, but in standard configuration must be in upper input port. So the question is: Is there also a input option for this minisatip version like satip-axe for digibit: "-X 1" or newer Version "-9 1"?
But the greater problem is no oscam support in this version. Can you add "-o" Oscam DVBAPI support? Also maybe minisatip WebIF?
Thanks a lot, maybe also other people are really happy about a usable version for newest VU+ STBs and maybe the spend a bit to this great minisatip project, i will hope so!
But the greater problem is no oscam support in this version. Can you add "-o" Oscam DVBAPI support? Also maybe minisatip WebIF?
Thanks a lot, maybe also other people are really happy about a usable version for newest VU+ STBs and maybe the spend a bit to this great minisatip project, i will hope so!
-
- Posts: 14
- Joined: Wed Feb 08, 2017 2:12 am
Re: minisatip for VU+ Ultimo 4K
Hello cata? Do you think it's possible to compile a version with "-o" OSCam-DVBAPI and WebIF support?
Re: minisatip for VU+ Ultimo 4K
Hi,
try now from the same URL.
It is compiled with -o support
Thanks
try now from the same URL.
It is compiled with -o support
Thanks
-
- Posts: 14
- Joined: Wed Feb 08, 2017 2:12 am
Re: minisatip for VU+ Ultimo 4K
Hi, new file not work at all. Server broadcast name (minisatip), but no connection from satip clients possible:
root@vuultimo4k:/var/volatile/tmp# minisatip -f -j 8:8-975,9:9-1025,10:10-1225,11:11-1330,12:12-1430,13:13-1535,14:14-16
30,15:15-1730
[18/07 01:15:32.923 main]: map_int: s=>NULL, v=(nil), NULL NULL
[18/07 01:15:32.923 main]: Setting jess adapter 8 slot 8 freq 975
[18/07 01:15:32.923 main]: map_int: s=>NULL, v=(nil), NULL NULL
[18/07 01:15:32.923 main]: Setting jess adapter 9 slot 9 freq 1025
[18/07 01:15:32.923 main]: map_int: s=>NULL, v=(nil), NULL NULL
[18/07 01:15:32.923 main]: Setting jess adapter 10 slot 10 freq 1225
[18/07 01:15:32.923 main]: map_int: s=>NULL, v=(nil), NULL NULL
[18/07 01:15:32.924 main]: Setting jess adapter 11 slot 11 freq 1330
[18/07 01:15:32.924 main]: map_int: s=>NULL, v=(nil), NULL NULL
[18/07 01:15:32.924 main]: Setting jess adapter 12 slot 12 freq 1430
[18/07 01:15:32.924 main]: map_int: s=>NULL, v=(nil), NULL NULL
[18/07 01:15:32.924 main]: Setting jess adapter 13 slot 13 freq 1535
[18/07 01:15:32.924 main]: map_int: s=>NULL, v=(nil), NULL NULL
[18/07 01:15:32.924 main]: Setting jess adapter 14 slot 14 freq 1630
[18/07 01:15:32.924 main]: map_int: s=>NULL, v=(nil), NULL NULL
[18/07 01:15:32.924 main]: Setting jess adapter 15 slot 15 freq 1730
also no log is written...
root@vuultimo4k:/var/volatile/tmp# minisatip -f -j 8:8-975,9:9-1025,10:10-1225,11:11-1330,12:12-1430,13:13-1535,14:14-16
30,15:15-1730
[18/07 01:15:32.923 main]: map_int: s=>NULL, v=(nil), NULL NULL
[18/07 01:15:32.923 main]: Setting jess adapter 8 slot 8 freq 975
[18/07 01:15:32.923 main]: map_int: s=>NULL, v=(nil), NULL NULL
[18/07 01:15:32.923 main]: Setting jess adapter 9 slot 9 freq 1025
[18/07 01:15:32.923 main]: map_int: s=>NULL, v=(nil), NULL NULL
[18/07 01:15:32.923 main]: Setting jess adapter 10 slot 10 freq 1225
[18/07 01:15:32.923 main]: map_int: s=>NULL, v=(nil), NULL NULL
[18/07 01:15:32.924 main]: Setting jess adapter 11 slot 11 freq 1330
[18/07 01:15:32.924 main]: map_int: s=>NULL, v=(nil), NULL NULL
[18/07 01:15:32.924 main]: Setting jess adapter 12 slot 12 freq 1430
[18/07 01:15:32.924 main]: map_int: s=>NULL, v=(nil), NULL NULL
[18/07 01:15:32.924 main]: Setting jess adapter 13 slot 13 freq 1535
[18/07 01:15:32.924 main]: map_int: s=>NULL, v=(nil), NULL NULL
[18/07 01:15:32.924 main]: Setting jess adapter 14 slot 14 freq 1630
[18/07 01:15:32.924 main]: map_int: s=>NULL, v=(nil), NULL NULL
[18/07 01:15:32.924 main]: Setting jess adapter 15 slot 15 freq 1730
also no log is written...