Mutant HD2400 minisatip

Support forum for minisatip
retrofan

Re: Mutant HD2400 minisatip

Post by retrofan »

Channelscan takes 3 minutes and 45 seconds on Mutant while it takes 1 minute and 15 seconds on Dreambox for exact the same channels. Do you have a clue why it takes so long? Maybe also because of the low pids filtering and it has to split up?
cata
Site Admin
Posts: 768
Joined: Tue May 12, 2015 1:01 am

Re: Mutant HD2400 minisatip

Post by cata »

Hi,

Thank you for the donation.

Yes that can be the reason, as you can see it can set just 10 pid filters.

you have the log in ~/minisatip.log on mutant.

Relevant lines:

[02/08 02:12:09.269 main]: setting filter on PID 0 for fd 13
[02/08 02:12:09.269 main]: setting filter on PID 1 for fd 14
[02/08 02:12:09.270 main]: setting filter on PID 2 for fd 15
[02/08 02:12:09.271 main]: setting filter on PID 3 for fd 16
[02/08 02:12:09.271 main]: setting filter on PID 4 for fd 17
[02/08 02:12:09.272 main]: setting filter on PID 5 for fd 18
[02/08 02:12:09.273 main]: setting filter on PID 6 for fd 19
[02/08 02:12:09.273 main]: setting filter on PID 7 for fd 20
[02/08 02:12:09.274 main]: setting filter on PID 8 for fd 21
[02/08 02:12:09.275 main]: setting filter on PID 9 for fd 22
[02/08 02:12:09.275 main]: failed setting filter on /dev/dvb/adapter0/demux0 pid 10, errno 122 (Operation not supported), enabled pids 21
[02/08 02:12:09.275 main]: Maximum pid filter reached, lowering the value to 8

The code to add a filter is:
https://github.com/catalinii/minisatip/ ... dvb.c#L804

Thanks
retrofan

Re: Mutant HD2400 minisatip

Post by retrofan »

Thanks cata. I put the log over here for the record.
Last edited by retrofan on Sun Aug 06, 2017 8:56 am, edited 1 time in total.
retrofan

Re: Mutant HD2400 minisatip

Post by retrofan »

This log is from the Dreambox DM7020HD and is working fine, also for the record.
retrofan

Re: Mutant HD2400 minisatip

Post by retrofan »

Last attempt to increase the number of pids: is it possible to put minisatip in DVB-C mode only? The Mutant has a hybride tuner for DVB-T/T2/C and I don't know if the number of pids are lower in hybride mode. My Dreambox DM7020HD has DVB-C only.
cata
Site Admin
Posts: 768
Joined: Tue May 12, 2015 1:01 am

Re: Mutant HD2400 minisatip

Post by cata »

When I am tuning I am selecting DVBC as system. There is no other way to select the system.
retrofan

Re: Mutant HD2400 minisatip

Post by retrofan »

OK, thanks
retrofan

Re: Mutant HD2400 minisatip

Post by retrofan »

Hi cata, you discussed driver issue with Mutant. Did they reply to you?
retrofan

Re: Mutant HD2400 minisatip

Post by retrofan »

retrofan wrote: Sun Jul 30, 2017 8:14 am I'm sorry, but there is no change.

However, I also tried AuroraTV (Android app) with your latest build of July 26 on Mutant HD2400 and this works great! Even the filters "FTA" and "ALL" are working as it should be! Also, the specinv parameter works correctly (autodetect)

My conclusion so far:

1. DVBViewer Pro works fine on Dreambox DM7020HD with and without "FTA" and "ALL" filters.
2. DVBViewer Pro works on Mutant HD2400, however, without "FTA" and "ALL" filters. (flags detected incorrectly)
3. AuroraTV works fine on Mutant HD2400 even with "FTA" and "ALL" flags/filters using Homing channel instead of transponderlists
4. AuroraTV doesn't work on Dreambox DM7020HD. Doesn't detect signal at all. (?)

So, interesting, but I don't know why the programs are acting differently with minisatip on Dreambox / Mutant. A driver issue?
No problems anymore with Mutant HD2400 when using the latest minisatip build ;-) Channelscan is fast (more pids?) and both DVBViewer Pro and AuroraTV do work now! I tested it again as I bought another Enigma2 receiver, the Formuler F1 which also does work! I did sell my older Dreambox.
This thread can be closed.
Post Reply