Hello! I have 10 satellites in 12 port disc . One of the satellites has a r/l polarization.
Managed to watch through TVHeadend only the satellite that is connected to the first port. When trying to scan a satellite with R/L polarization minisatip falls. What am I doing wrong? How to scan the others?
Sorry for English is not my native language
Diseqc 12 ports
Re: Diseqc 12 ports
Hi,
you have just a diseqc 1.1 switch ? Or you have multiple switches ?
What command line are you using ?
Please upload the logs.
Thanks
you have just a diseqc 1.1 switch ? Or you have multiple switches ?
What command line are you using ?
Please upload the logs.
Thanks
Re: Diseqc 12 ports
Diseqc 1.1 - 12 ports
and cascading Diseqc 1.1 12p - Diseqc 1.0 4p
/var/www/minisatip -a 0 -d 0:0-1
To connect turned out all the satellites except those that connected in cascade
After I rebooted the receiver, there was another problem, all channels stopped running a CC greater than 70. Although on the receiver, all channels are working fine
log - https://www.dropbox.com/s/qdqsiklbbivqh ... p.log?dl=0
and cascading Diseqc 1.1 12p - Diseqc 1.0 4p
/var/www/minisatip -a 0 -d 0:0-1
To connect turned out all the satellites except those that connected in cascade
After I rebooted the receiver, there was another problem, all channels stopped running a CC greater than 70. Although on the receiver, all channels are working fine
log - https://www.dropbox.com/s/qdqsiklbbivqh ... p.log?dl=0
- Attachments
-
- p4jCyGnhQOmn4UwLVpnW1g.png (26.6 KiB) Viewed 11887 times
Re: Diseqc 12 ports
Hi,
the command line you're using works only for diseqc 1.1 switches.
I see some errors in the logs, is enigma2 killed while running minisatip ?
I see that you are able to use some frequencies, what exactly does not work ?
Thank you
the command line you're using works only for diseqc 1.1 switches.
I see some errors in the logs, is enigma2 killed while running minisatip ?
I see that you are able to use some frequencies, what exactly does not work ?
Thank you
Re: Diseqc 12 ports
Enigma2 work, reciever in stand-by mode
i have 12 ports diseqc
work 1-10
but on 2 port connected diseqc 1.0 - port 1/3/4. port 1 work, how select 3 and 4?
i have 12 ports diseqc
work 1-10
but on 2 port connected diseqc 1.0 - port 1/3/4. port 1 work, how select 3 and 4?
Re: Diseqc 12 ports
I found the ipk file minisatip-mips32el ( http://downloads.pli-images.org/feeds/o ... ps32el.ipk ) and install . Channels were working correctly. But only 1 satellite connected to ports 1
Maybe you can help with the how to make ipk file with libdvbc ?
root@sezam5000hd:/var/volatile/tmp# minisatip -a 0 -d 0:0-1
[15/09 19:40:38.000]: Setting diseqc adapter 0 committed_no 0 uncommitted_no 1
[15/09 19:40:38.001]: minisatip was not compiled with DVBCSA support, please install libdvbcsa (libdvbcsa-dev in Ubuntu) and change the Makefile
Maybe you can help with the how to make ipk file with libdvbc ?
root@sezam5000hd:/var/volatile/tmp# minisatip -a 0 -d 0:0-1
[15/09 19:40:38.000]: Setting diseqc adapter 0 committed_no 0 uncommitted_no 1
[15/09 19:40:38.001]: minisatip was not compiled with DVBCSA support, please install libdvbcsa (libdvbcsa-dev in Ubuntu) and change the Makefile
Re: Diseqc 12 ports
Hi,
You can use the minisatip binary for gigablue mips from the minisatip binaries.
If second adapter is diseqc 1.0 you need to specify
-d 0:0-1,1:1-0
In tvheadend you can then 3rd and 4th satellite for the second adapter to the orbital position thst you want.
You can use the minisatip binary for gigablue mips from the minisatip binaries.
If second adapter is diseqc 1.0 you need to specify
-d 0:0-1,1:1-0
In tvheadend you can then 3rd and 4th satellite for the second adapter to the orbital position thst you want.
Re: Diseqc 12 ports
If I use minisatip binary for gigablue mips that get a lot of errors in the stream and webif not work. But verison minisatip mips32el from this ipk works well but is available only the satellite connected to the first port.
The second disceqc not connected to the second adapter. I made a chart to make it clearer.
The second disceqc not connected to the second adapter. I made a chart to make it clearer.
Re: Diseqc 12 ports
Hi
Then you need to run minisatip with -d 0:1-2
The satellite position is calculated:
pos(diseqc 1.0) = pos % 4;
pos (diseqc 1.1 )= pos / 4;
For port 2 diseqc 1.1 and port 3 diseqc 1.0 (in minisatip ports start from 0).
You need (2-1)*4 + (3-1) which is 6.
For port 3 diseqc 1.1 try (3-1)*4 = 8 and so on
Then you need to run minisatip with -d 0:1-2
The satellite position is calculated:
pos(diseqc 1.0) = pos % 4;
pos (diseqc 1.1 )= pos / 4;
For port 2 diseqc 1.1 and port 3 diseqc 1.0 (in minisatip ports start from 0).
You need (2-1)*4 + (3-1) which is 6.
For port 3 diseqc 1.1 try (3-1)*4 = 8 and so on
Re: Diseqc 12 ports
How do I get rid of the errors during the stream?