I have problem with descrambling on minisatip running on sh4 with oscam.
I tried with /tmp/camd.socket and with tcp connection.
In oscam logs i see that decryption is done but i have no picture.
FTA channels works.
Has anyone uses this setup successfully?
problem with minisatip with oscam on sh4
Re: problem with minisatip with oscam on sh4
Now im able to run on SH4, with OSCAM but after few time of descrambling stops - there are no requests from minisatip to oscam.
I tried with two clients - panasonic tv and tvheadend.
@cata - can you help? I can give you access to sh4 box if you need.
I tried with two clients - panasonic tv and tvheadend.
@cata - can you help? I can give you access to sh4 box if you need.
- Attachments
-
- logs_panasonic.zip
- (62.22 KiB) Downloaded 403 times
-
- logs_tvh.zip
- (62.05 KiB) Downloaded 415 times
Re: problem with minisatip with oscam on sh4
Sure, can you grt me just minisatip and oscam logs?
Start minisatip with -l pmt,http
Thanks
Start minisatip with -l pmt,http
Thanks
Re: problem with minisatip with oscam on sh4
Logs attached.
channel works some time - after this hangs and after some time runs again,
Logs have minisatip.log - log from start to first hang, minisatip2.log - from first hang to start and second hang.
oscam.log and oscam2.log - the same as above.
Strange is that there are so many connects from minisat to oscam - its look like every ecm is send by new connection... oscam logs looks very strange.
@cata waiting for your help
(logs deleted)
channel works some time - after this hangs and after some time runs again,
Logs have minisatip.log - log from start to first hang, minisatip2.log - from first hang to start and second hang.
oscam.log and oscam2.log - the same as above.
Strange is that there are so many connects from minisat to oscam - its look like every ecm is send by new connection... oscam logs looks very strange.
@cata waiting for your help
(logs deleted)
Last edited by seal on Sat Jan 06, 2018 7:19 pm, edited 1 time in total.
Re: problem with minisatip with oscam on sh4
Hi,
sorry for taking so long to answer.
Try now with the latest binary from the forum.
Thank you
sorry for taking so long to answer.
Try now with the latest binary from the forum.
Thank you
Re: problem with minisatip with oscam on sh4
Is much better. Almost all afternoon was working ok, I restarted at 18:10 and there logs from there and everything was working fter 19:20-19:30 - when i tried to change channel i got no video, i wated some time and now i got "no service" but somtching is in logs in oscam and ministatip. Logs attached.
Re: problem with minisatip with oscam on sh4
Left without restart minisatip - nothing changed - no video, tried restart oscam but not minisatip - the same result.
New logs attached.
New logs attached.
Re: problem with minisatip with oscam on sh4
try maybe running:
oscam -d 128 and get the output
The thing is that in the local socket mode, minisatip sends the PMT to oscam, which then does the decrypting without minisatip, if that does not work most likely the issue is on oscam side.
Thanks
oscam -d 128 and get the output
The thing is that in the local socket mode, minisatip sends the PMT to oscam, which then does the decrypting without minisatip, if that does not work most likely the issue is on oscam side.
Thanks
-
- Posts: 25
- Joined: Fri Dec 15, 2017 10:07 am
Re: problem with minisatip with oscam on sh4
Hi cata,
can satip client control the USALS positioner?
I have satip server (sh4box with minisatip connected to USALS positioner dish) and satip client (mips box with satip client plugin, enigma2 ATV 6.2).
It works normally except the sat. dish positioning.
When I operate sh4 alone then positioning works.
The virtual tuner (tuner B:SAT>IP DVB-S2 VTUNER) of satip client is set to USALS mode.
Thanks for your answer in advance.
can satip client control the USALS positioner?
I have satip server (sh4box with minisatip connected to USALS positioner dish) and satip client (mips box with satip client plugin, enigma2 ATV 6.2).
It works normally except the sat. dish positioning.
When I operate sh4 alone then positioning works.
The virtual tuner (tuner B:SAT>IP DVB-S2 VTUNER) of satip client is set to USALS mode.
Thanks for your answer in advance.