Hi cata,
just tried today morning to get my VU+ UNO 4K SE running with minisatip.
I was wondering how to configure the link between the master and slaves.
During reading some posts and studying the minisat parameters I saw you just commiting the needed changes .
Looking forward to download the build of these commits for testing.
Please inform, when done.
Thank you for this great piece of software !
Regards, solut!
Support for FBC Tuners
Re: Support for FBC Tuners
Hi,
by default when running minisatip on FBC tuners, all the adapters are linked to the Tuner A physical input.
You can use -S to change that. Feel free to test and let me know the feedback.
Thank you
by default when running minisatip on FBC tuners, all the adapters are linked to the Tuner A physical input.
You can use -S to change that. Feel free to test and let me know the feedback.
Thank you
Re: Support for FBC Tuners
Hi cata,
can you please update the binaries (minisatip_arm for me ) for testing ?
Thanks.
can you please update the binaries (minisatip_arm for me ) for testing ?
Thanks.
Re: Support for FBC Tuners
Hi,
sure, the binaries are updated.
Thanks
sure, the binaries are updated.
Thanks
Re: Support for FBC Tuners
Hi cata,
did some testing and got some problems (log attached):
You may have look...
Thanks, solut.
did some testing and got some problems (log attached):
- Settings:
VU+ UNO 4K SE -> 2 Physical FBC Tuner -> 8vTuner.
Unicable input only Tuner A (0).
TVHeadend 4.3 as Sat-IP relay -> VLC.
- Actions:
Enigma stopped via init 4.
Minisatip run by: ./minisatip -u 0:0-974,1:1-1076 -S 1:0 -e 0-1 -l http,pmt -F ./minisatip.log
So only tuners A (0) and B (1) should be used.
A set to Bs master (just to be sure...)
Requesting Program on Tuner A --> OK.
Requesting in parallel Program on Tuner B -->NOK (Tuner A still works).
- Information:
The frequencies regarding the Unicable switch are correct.
In Enigma I have to assign all tuners as master/slave (tuner connection) this way: ...F->E->D->C->B->A.
So I just tested A and B to be sure the link is correct.
If I request program on Tuner B alone it's working.
You may have look...
Thanks, solut.
- Attachments
-
- minisatip.7z
- (15.98 KiB) Downloaded 342 times
Re: Support for FBC Tuners
Hi,
Try without -S. In the configuration used by you tuner B (adapter 1) is linked to tuner A, so. Basically both adapters uses input A.
Try the same commandline without -S
Thanks
Try without -S. In the configuration used by you tuner B (adapter 1) is linked to tuner A, so. Basically both adapters uses input A.
Try the same commandline without -S
Thanks
Re: Support for FBC Tuners
Did it - same result
Re: Support for FBC Tuners
Can you upload the log?
-l http,dvb
Thanks
-l http,dvb
Thanks
Re: Support for FBC Tuners
Try:
./minisatip -u 0:0-974,1:1-1076 -S 2:1 -e 0-2 -l http,pmt -F ./minisatip.log
./minisatip -u 0:0-974,1:1-1076 -S 2:1 -e 0-2 -l http,pmt -F ./minisatip.log