Hi Cata,
I have EVO Slim T2/C box. It has the same mips processor like gigablue x boxes. So I tried gigablue binary but with bad results.
I simpy copied binary to /usr/bin/ and start it this way: /usr/bin/minisatip -l -l -l. DVBViewer is able to tune some channels but they are called "service" and picture remains black. Enigma is oATV 6.1. I tried 6.2 as well with similar results.
Enclosed pls find log. I tried tune DVB-C channels on 730 MHz SR 6900 64 qam.
If you are interested I could arrange remote access for you.
Evo Slim T2/C
-
- Posts: 25
- Joined: Fri Dec 15, 2017 10:07 am
Evo Slim T2/C
- Attachments
-
- minisatip.zip
- (10.93 KiB) Downloaded 358 times
Re: Evo Slim T2/C
Hi,
try to add to minisatip command line:
-1 1
Thank you
try to add to minisatip command line:
-1 1
Thank you
-
- Posts: 25
- Joined: Fri Dec 15, 2017 10:07 am
Re: Evo Slim T2/C
cata wrote: ↑Fri Jan 19, 2018 5:59 am Hi,
try to add to minisatip command line:
-1 1
Thank you
[/quote
Hi again,
I really appreciate your help. With -1 1 it was much better but some issues remains.
DVB-C scan: I scanned 730MHz and 658MHZ, DVBViewer is able to tune all channels with proper names but
only HD channels (DVB-C H.264) are OK, SD channels (DVB-C mpeg2) are not OK, audio is OK but you can't see any picture - screen remains black.
DVB-T scan: I scanned whole DVBT range but DVBViewer wasn't able to tune even one channel. It is not signal problem, in enigma all DVB-T channels works normally.
DVBViewer is able to tune just DVB-T2 (HEVC) channels with proper names but you can hear just audio, screen remains black. There is a error message pls check enclosed pictures.
Looking forward to your answer..
P.S. Sorry for huge log
- Attachments
-
- DVBViewer2_small.jpg (168 KiB) Viewed 10226 times
-
- DVBViewer error_small.jpg (154.62 KiB) Viewed 10226 times
-
- minisatip.zip
- (95.46 KiB) Downloaded 364 times
Last edited by Friedlinghaus on Fri Jan 19, 2018 11:13 am, edited 1 time in total.
-
- Posts: 25
- Joined: Fri Dec 15, 2017 10:07 am
Re: Evo Slim T2/C
The reason why minisatip can't tune any DVB-T channel is maybe because he recognize just DVB-C and DVB-T2 device. Please check enclosed xml
file which I downloaded from http://Box_IP:8080/desc.xml
file which I downloaded from http://Box_IP:8080/desc.xml
- Attachments
-
- desc.zip
- (633 Bytes) Downloaded 357 times
Re: Evo Slim T2/C
Hi,
[19/01 08:21:41.450 main]: done opening adapter 0 delivery systems: dvbt dvbt2 dvbc undefined
[19/01 08:21:41.451 main]: FE 1 mapped to Adapter 0, sys dvbc
[19/01 08:21:41.451 main]: FE 2 mapped to Adapter 0, sys dvbt2
what you can try is to run minisatip with option -Y 0:dvbt then you should have dvbt only.
CU
9000h
[19/01 08:21:41.450 main]: done opening adapter 0 delivery systems: dvbt dvbt2 dvbc undefined
[19/01 08:21:41.451 main]: FE 1 mapped to Adapter 0, sys dvbc
[19/01 08:21:41.451 main]: FE 2 mapped to Adapter 0, sys dvbt2
what you can try is to run minisatip with option -Y 0:dvbt then you should have dvbt only.
CU
9000h
-
- Posts: 25
- Joined: Fri Dec 15, 2017 10:07 am
Re: Evo Slim T2/C
Hi,
thanks, I'll do that and I'll let you know.
I tried --delsys 0:dvbt, adapter was set to DVB-T but wasn't able to tune any dvbt channel.
thanks, I'll do that and I'll let you know.
I tried --delsys 0:dvbt, adapter was set to DVB-T but wasn't able to tune any dvbt channel.
-
- Posts: 25
- Joined: Fri Dec 15, 2017 10:07 am
Re: Evo Slim T2/C
So, I did it, adapter was set to dvbt but DVBViewer didn't find even one dvbt channel, he found dvbt2 channels again.9000h wrote: ↑Fri Jan 19, 2018 1:32 pm Hi,
[19/01 08:21:41.450 main]: done opening adapter 0 delivery systems: dvbt dvbt2 dvbc undefined
[19/01 08:21:41.451 main]: FE 1 mapped to Adapter 0, sys dvbc
[19/01 08:21:41.451 main]: FE 2 mapped to Adapter 0, sys dvbt2
what you can try is to run minisatip with option -Y 0:dvbt then you should have dvbt only.
CU
9000h
Re: Evo Slim T2/C
Can you upload the log with the parameter suggested by 9000h?
-
- Posts: 25
- Joined: Fri Dec 15, 2017 10:07 am
Re: Evo Slim T2/C
First I shot down enigma with init 4. Then I started minisatip: /usr/bin/minisatip -1 1 -Y 0:dvbt -l -l -l
I scanned whole uhf dvbt range, DVBViewer found just dvbt2 channels at 554 MHz. Yesterday I scanned dvbt with Panasonic Tv with the same result.
- Attachments
-
- desc_with_Y_0-dvbt.zip
- (651 Bytes) Downloaded 339 times
-
- minisatip.zip
- (32.34 KiB) Downloaded 343 times
Re: Evo Slim T2/C
Yeah it is true, I see data just on 554MHZ. Are you sure the signal is strong enough ?