Several newbie Questions MultiSwitch 9/8 setup

Support forum for minisatip
Post Reply
Peque
Posts: 1
Joined: Wed May 01, 2019 4:38 pm

Several newbie Questions MultiSwitch 9/8 setup

Post by Peque » Sun May 05, 2019 1:12 pm

Hi Guys.
I've beening running MythTV for several years - using DVB-S and ffdecsawrapper - serving Sat and storage setups for my TV at home
So I desided to give this a try.
Reinstalled my PC with debian 4.9 - and clone the latest minisat - installed all firware and drivers for tuner etc and Oscam on localhost
As I can See my TBS 6985 are discovered - for some sekunds and fails out.
I have my Satelite setup like this:
1 Sat 0.8Thor attached to MultiSwitch 9/8 as sat A. (No satelite as sat B.)
my devices shows as:

Code: Select all

Dmesg: 
[    3.724139] TurboSight TBS 6985 Frontend Attaching...
[    3.842108] TurboSight TBS6985 DVB-S2 card port0 MAC=00:22:ab:90:81:a4
[    3.842111] DVB: registering adapter 0 frontend 0 (TurboSight TBS 6985 DVBS/S2 frontend)...
[    3.842232] DVB: registering new adapter (SAA716x dvb adapter)
[    4.332141] TurboSight TBS 6985 Frontend Attaching...
[    4.444943] TurboSight TBS6985 DVB-S2 card port1 MAC=00:22:ab:90:81:a5
[    4.444947] DVB: registering adapter 1 frontend 0 (TurboSight TBS 6985 DVBS/S2 frontend)...
[    4.445200] DVB: registering new adapter (SAA716x dvb adapter)
[    4.940124] TurboSight TBS 6985 Frontend Attaching...
[    5.052939] TurboSight TBS6985 DVB-S2 card port2 MAC=00:22:ab:90:81:a6
[    5.052942] DVB: registering adapter 2 frontend 0 (TurboSight TBS 6985 DVBS/S2 frontend)...
[    5.053179] DVB: registering new adapter (SAA716x dvb adapter)
[    5.548133] TurboSight TBS 6985 Frontend Attaching...
[    5.660936] TurboSight TBS6985 DVB-S2 card port3 MAC=00:22:ab:90:81:a7
[    5.660939] DVB: registering adapter 3 frontend 0 (TurboSight TBS 6985 DVBS/S2 frontend)...

ls  /dev/dvb/adapter*
/dev/dvb/adapter0:
demux0	dvr0  frontend0  net0
/dev/dvb/adapter1:
demux0	dvr0  frontend0  net0
/dev/dvb/adapter2:
demux0	dvr0  frontend0  net0
/dev/dvb/adapter3:
demux0	dvr0  frontend0  net0
I did a scan /using w_scan and created a file - channels.conf - How do I create a m3u list from this ? Normally I'll make MythTV handle this
So for start options for these setting I do not get. ( I'll properly using them wrongs )

Code: Select all

./minisatip -a x -d *:1-0 -e 0-3 -L *:9750-10600-11700 -o 127.0.0.1:15011 -D 1 -F /var/log/minisat/minisat.log 
which start up the minisat and show no signal on the 4 -DVB-S tuners and after some seconds. but no signal!

But this is my Logfile :

Code: Select all

[05/05 15:06:52.469 main]: minisatip version 0.7.16, compiled with s2api version: 050A
[05/05 15:06:52.469 main]: Built with dvbcsa
[05/05 15:06:52.469 main]: Built with CI
[05/05 15:06:52.469 main]: Built with dvbapi
[05/05 15:06:52.469 main]: Built with AES (OpenSSL)
[05/05 15:06:52.469 main]: Built with tables processing
[05/05 15:06:52.469 main]: Built with pmt processing
[05/05 15:06:52.469 main]: Built with satip client
[05/05 15:06:52.469 main]: Built with linux dvb client
[05/05 15:06:52.469 main]: Built with backtrace
[05/05 15:06:52.469 main]: Built without netceiver
[05/05 15:06:52.469 main]: Built without ddci
[05/05 15:06:52.469 main]: Built without t2mi
[05/05 15:06:52.469 main]: New UDP socket 3 bound to 0.0.0.0:1900 
[05/05 15:06:52.469 main]: setting multicast for 239.255.255.250
[05/05 15:06:52.469 main]: New UDP socket 4 bound to 239.255.255.250:1900 (mcast:239.255.255.250)
[05/05 15:06:52.469 main]: Mutex init 0x559a78155f00
[05/05 15:06:52.469 main]: Mutex init 0x559a798bea08
[05/05 15:06:52.469 main]: sockets_add: handle 3 (type 0) returning socket sock 0 [0.0.0.0:0] read: 0x559a77f08b91
[05/05 15:06:52.469 main]: Mutex init 0x559a798beb68
[05/05 15:06:52.469 main]: sockets_add: handle 4 (type 0) returning socket sock 1 [0.0.0.0:0] read: 0x559a77f08b91
[05/05 15:06:52.469 main]: Mutex init 0x559a798becc8
[05/05 15:06:52.469 main]: sockets_add: handle 5 (type 2) returning socket sock 2 [0.0.0.0:0] read: 0x559a77f08992
[05/05 15:06:52.469 main]: Mutex init 0x559a798bee28
[05/05 15:06:52.469 main]: sockets_add: handle 6 (type 2) returning socket sock 3 [0.0.0.0:0] read: 0x559a77f08992
[05/05 15:06:52.469 main]: Mutex init 0x559a798bef88
[05/05 15:06:52.469 main]: sockets_add: handle -2 (type 0) returning socket sock 4 [0.0.0.0:0] read: 0x559a77f08b91
[05/05 15:06:52.469 main]: set_socket_thread: thread 4b871700 for sockets 4
[05/05 15:06:52.469 main]: Mutex init 0x559a798c0ad8
[05/05 15:06:52.469 main]: sockets_add: handle -2 (type 0) returning socket sock 5 [0.0.0.0:0] read: 0x559a77f08b91
[05/05 15:06:52.469 main]: set_socket_thread: thread 4b871700 for sockets 5
[05/05 15:06:52.469 signal]: Starting select_and_execute on thread ID 4b871700, thread_name signal
[05/05 15:06:52.470 main]: Mutex init 0x559a78159ee0
[05/05 15:06:52.470 main]: Mutex init 0x559a78159f40
[05/05 15:06:52.472 main]: Mutex init 0x559a78169c80
[05/05 15:06:52.472 main]: Mutex init 0x559a798d7ed8
[05/05 15:06:52.472 main]: sockets_add: handle -2 (type 0) returning socket sock 6 [0.0.0.0:0] read: 0x559a77f08b91
[05/05 15:06:52.472 main]: Mutex init 0x559a781573c0
[05/05 15:06:52.472 main]: starting init_all_hw 0
[05/05 15:06:52.472 main]: Mutex init 0x559a781563c0
[05/05 15:06:52.472 main]: find_dvb_adapter: adding 0 0 to the list of devices
[05/05 15:06:52.473 main]: find_dvb_adapter: adding 1 0 to the list of devices
[05/05 15:06:52.473 main]: find_dvb_adapter: adding 2 0 to the list of devices
[05/05 15:06:52.473 main]: find_dvb_adapter: adding 3 0 to the list of devices
[05/05 15:06:52.481 main]: Mutex init 0x559a798d8038
[05/05 15:06:52.481 main]: trying to open [0] adapter 0 and frontend 0
[05/05 15:06:52.482 main]: opened DVB adapter 0 fe:7 dvr:8
[05/05 15:06:52.482 main]: DVR buffer set to 5775360 bytes
[05/05 15:06:52.482 main]: deleting pids on adapter 0, sid -1, pids=NULL
[05/05 15:06:52.703 main]: unable to query frontend, perhaps DVB-API < 5.5 ?
[05/05 15:06:52.703 main]: Detected adapter 0 handle 7 DVB Card Name: TurboSight TBS 6985 DVBS/S2 frontend
[05/05 15:06:52.703 main]: Detected delivery system for adapter 0: dvbs2 [6]
[05/05 15:06:52.703 main]: Detected delivery system for adapter 0: dvbs [5]
[05/05 15:06:52.703 main]: Mutex init 0x559a798f0dd8
[05/05 15:06:52.703 main]: sockets_add: handle 8 (type 5) returning socket sock 7 [0.0.0.0:0] read: 0x559a77f08ae8
[05/05 15:06:52.703 main]: set_socket_thread: thread 4b070700 for sockets 7
[05/05 15:06:52.703 main]: No CA device detected on adapter 0: file /dev/dvb/adapter0/ca0
[05/05 15:06:52.703 main]: done opening adapter 0 delivery systems: dvbs2 undefined undefined undefined
[05/05 15:06:52.703 main]: FE 1 mapped to Adapter 0, sys dvbs2
[05/05 15:06:52.703 main]: Mutex init 0x559a798d9d18
[05/05 15:06:52.703 main]: trying to open [1] adapter 1 and frontend 0
[05/05 15:06:52.703 AD0]: Starting select_and_execute on thread ID 4b070700, thread_name AD0
[05/05 15:06:52.704 main]: opened DVB adapter 1 fe:9 dvr:10
[05/05 15:06:52.704 main]: DVR buffer set to 5775360 bytes
[05/05 15:06:52.704 main]: deleting pids on adapter 1, sid -1, pids=NULL
[05/05 15:06:52.923 main]: unable to query frontend, perhaps DVB-API < 5.5 ?
[05/05 15:06:52.923 main]: Detected adapter 1 handle 9 DVB Card Name: TurboSight TBS 6985 DVBS/S2 frontend
[05/05 15:06:52.923 main]: Detected delivery system for adapter 1: dvbs2 [6]
[05/05 15:06:52.923 main]: Detected delivery system for adapter 1: dvbs [5]
[05/05 15:06:52.923 main]: Mutex init 0x559a79902a88
[05/05 15:06:52.923 main]: sockets_add: handle 10 (type 5) returning socket sock 8 [0.0.0.0:0] read: 0x559a77f08ae8
[05/05 15:06:52.923 main]: set_socket_thread: thread 4a86f700 for sockets 8
[05/05 15:06:52.923 main]: No CA device detected on adapter 1: file /dev/dvb/adapter1/ca0
[05/05 15:06:52.923 main]: done opening adapter 1 delivery systems: dvbs2 undefined undefined undefined
[05/05 15:06:52.923 AD1]: Starting select_and_execute on thread ID 4a86f700, thread_name AD1
[05/05 15:06:52.923 main]: FE 1 mapped to Adapter 0, sys dvbs2
[05/05 15:06:52.923 main]: FE 2 mapped to Adapter 1, sys dvbs2
[05/05 15:06:52.923 main]: Mutex init 0x559a798db9f8
[05/05 15:06:52.923 main]: trying to open [2] adapter 2 and frontend 0
[05/05 15:06:52.924 main]: opened DVB adapter 2 fe:11 dvr:12
[05/05 15:06:52.924 main]: DVR buffer set to 5775360 bytes
[05/05 15:06:52.924 main]: deleting pids on adapter 2, sid -1, pids=NULL
[05/05 15:06:53.143 main]: unable to query frontend, perhaps DVB-API < 5.5 ?
[05/05 15:06:53.143 main]: Detected adapter 2 handle 11 DVB Card Name: TurboSight TBS 6985 DVBS/S2 frontend
[05/05 15:06:53.143 main]: Detected delivery system for adapter 2: dvbs2 [6]
[05/05 15:06:53.143 main]: Detected delivery system for adapter 2: dvbs [5]
[05/05 15:06:53.143 main]: Mutex init 0x559a79914738
[05/05 15:06:53.143 main]: sockets_add: handle 12 (type 5) returning socket sock 9 [0.0.0.0:0] read: 0x559a77f08ae8
[05/05 15:06:53.143 main]: set_socket_thread: thread 4a06e700 for sockets 9
[05/05 15:06:53.143 main]: No CA device detected on adapter 2: file /dev/dvb/adapter2/ca0
[05/05 15:06:53.143 main]: done opening adapter 2 delivery systems: dvbs2 undefined undefined undefined
[05/05 15:06:53.143 AD2]: Starting select_and_execute on thread ID 4a06e700, thread_name AD2
[05/05 15:06:53.143 main]: FE 1 mapped to Adapter 0, sys dvbs2
[05/05 15:06:53.143 main]: FE 2 mapped to Adapter 1, sys dvbs2
[05/05 15:06:53.143 main]: FE 3 mapped to Adapter 2, sys dvbs2
[05/05 15:06:53.143 main]: Mutex init 0x559a798dd6d8
[05/05 15:06:53.143 main]: trying to open [3] adapter 3 and frontend 0
[05/05 15:06:53.144 main]: opened DVB adapter 3 fe:13 dvr:14
[05/05 15:06:53.144 main]: DVR buffer set to 5775360 bytes
[05/05 15:06:53.144 main]: deleting pids on adapter 3, sid -1, pids=NULL
[05/05 15:06:53.363 main]: unable to query frontend, perhaps DVB-API < 5.5 ?
[05/05 15:06:53.363 main]: Detected adapter 3 handle 13 DVB Card Name: TurboSight TBS 6985 DVBS/S2 frontend
[05/05 15:06:53.363 main]: Detected delivery system for adapter 3: dvbs2 [6]
[05/05 15:06:53.363 main]: Detected delivery system for adapter 3: dvbs [5]
[05/05 15:06:53.363 main]: Mutex init 0x559a799263e8
[05/05 15:06:53.363 main]: sockets_add: handle 14 (type 5) returning socket sock 10 [0.0.0.0:0] read: 0x559a77f08ae8
[05/05 15:06:53.363 main]: set_socket_thread: thread 4986d700 for sockets 10
[05/05 15:06:53.363 main]: No CA device detected on adapter 3: file /dev/dvb/adapter3/ca0
[05/05 15:06:53.363 main]: done opening adapter 3 delivery systems: dvbs2 undefined undefined undefined
[05/05 15:06:53.363 AD3]: Starting select_and_execute on thread ID 4986d700, thread_name AD3
[05/05 15:06:53.363 main]: FE 1 mapped to Adapter 0, sys dvbs2
[05/05 15:06:53.363 main]: FE 2 mapped to Adapter 1, sys dvbs2
[05/05 15:06:53.363 main]: FE 3 mapped to Adapter 2, sys dvbs2
[05/05 15:06:53.363 main]: FE 4 mapped to Adapter 3, sys dvbs2
[05/05 15:06:53.363 main]: done init_hw 1
[05/05 15:06:53.363 main]: Initializing with 4 devices
[05/05 15:06:53.363 main]: Starting select_and_execute on thread ID 4d11ff00, thread_name main
[05/05 15:06:53.363 main]: Mutex init 0x559a79926678
[05/05 15:06:53.363 main]: sockets_add: handle 15 (type 1) returning socket sock 11 [172.16.0.52:42474] read: 0x559a77f08ae8
[05/05 15:06:53.364 main]: read HTTP from 15 sid: -1: 
[05/05 15:06:53.364 main]: Mutex init 0x559a78155f80
[05/05 15:06:53.364 main]: reply -> 15 (172.16.0.52:42474) CL:76 [sock_id 11]:
[05/05 15:06:53.366 main]: select_and_execute[11]: Close on socket 15 (sid:-1) from 172.16.0.52:42474 - type http errno 0
[05/05 15:06:53.366 main]: minisatip.c:1443 get_sid returns NULL for s_id = -1
[05/05 15:06:53.366 main]: Requested stream close -1 timeout -1 type -1
[05/05 15:06:53.367 main]: closing stream -1
[05/05 15:06:53.367 main]: sockets_del: sock 11 -> handle 15, sid -1, overflow bytes 0, allocated 0, used 0, unsend packets 0
[05/05 15:06:53.367 main]: sockets_del: 11 Last open socket is at index 11 current_handle 15
[05/05 15:06:53.367 main]: Destroying mutex 0x559a79926678
[05/05 15:06:53.367 main]: Delete socket 11 done: sid -1
[05/05 15:06:53.467 main]: New TCP socket 15 connected to 172.16.0.15:15011
[05/05 15:06:53.467 main]: Mutex init 0x559a79926678
[05/05 15:06:53.467 main]: sockets_add: handle 15 (type 1) returning socket sock 11 [0.0.0.0:0] read: 0x559a77f08ae8
[05/05 15:06:53.467 main]: select_and_execute[11]: Connected on socket 15 (sid:-1) from 0.0.0.0:0 - type tcp errno 11
[05/05 15:06:53.467 main]: dvbapi read from socket 15 the following data (68 bytes), pos = 0, op FFFF0002, key 0
[05/05 15:06:53.467 main]: dvbapi: server version 3 found, name = OSCam v1.20_svn, build r11517 (x86_64-linux-gnu-ssl-libusb); 
[05/05 15:06:54.288 main]: Mutex init 0x559a799267d8
[05/05 15:06:54.289 main]: sockets_add: handle 16 (type 1) returning socket sock 12 [172.16.0.52:42476] read: 0x559a77f08ae8
[05/05 15:06:54.289 main]: read HTTP from 16 sid: -1: 
[05/05 15:06:54.289 main]: reply -> 16 (172.16.0.52:42476) CL:76 [sock_id 12]:
[05/05 15:06:54.292 main]: select_and_execute[12]: Close on socket 16 (sid:-1) from 172.16.0.52:42476 - type http errno 0
[05/05 15:06:54.292 main]: minisatip.c:1443 get_sid returns NULL for s_id = -1
[05/05 15:06:54.292 main]: Requested stream close -1 timeout -1 type -1
[05/05 15:06:54.292 main]: closing stream -1
[05/05 15:06:54.292 main]: sockets_del: sock 12 -> handle 16, sid -1, overflow bytes 0, allocated 0, used 0, unsend packets 0
[05/05 15:06:54.292 main]: sockets_del: 12 Last open socket is at index 12 current_handle 16
[05/05 15:06:54.292 main]: Destroying mutex 0x559a799267d8
[05/05 15:06:54.292 main]: Delete socket 12 done: sid -1
[05/05 15:06:55.300 main]: Mutex init 0x559a799267d8
[05/05 15:06:55.300 main]: sockets_add: handle 16 (type 1) returning socket sock 12 [172.16.0.52:42478] read: 0x559a77f08ae8
[05/05 15:06:55.301 main]: read HTTP from 16 sid: -1: 
[05/05 15:06:55.301 main]: reply -> 16 (172.16.0.52:42478) CL:76 [sock_id 12]:
[05/05 15:06:55.304 main]: select_and_execute[12]: Close on socket 16 (sid:-1) from 172.16.0.52:42478 - type http errno 0
[05/05 15:06:55.304 main]: minisatip.c:1443 get_sid returns NULL for s_id = -1
[05/05 15:06:55.304 main]: Requested stream close -1 timeout -1 type -1
[05/05 15:06:55.304 main]: closing stream -1

Post Reply