Page 1 of 1

FBC on vuplus uno4k se.... Again

Posted: Sun Sep 15, 2019 5:56 pm
by guigue
Hi cata,

I have minisatip installed on a vuplus uno4k se, with two fbc tuners. Tvheadend installed on a pi3b +, it detects the tuners and they work, but I have many continuity errors that make an acceptable display impossible. I have read in the forum and launched all possible solutions that are in the different posts, but none solves my problem.

Any news or possible action on my part to make it work properly?

Re: FBC on vuplus uno4k se.... Again

Posted: Sun Sep 15, 2019 11:58 pm
by cata
Hi,

Is in enigma everything good?

Re: FBC on vuplus uno4k se.... Again

Posted: Mon Sep 16, 2019 7:46 am
by guigue
cata wrote: Sun Sep 15, 2019 11:58 pm Hi,

Is in enigma everything good?
Yes, everything is running without troubles. (openatv 6.3)

Re: FBC on vuplus uno4k se.... Again

Posted: Tue Sep 17, 2019 4:06 am
by cata
can u attch the logs ? (add -f -l http,dvb)

Re: FBC on vuplus uno4k se.... Again

Posted: Tue Sep 17, 2019 7:14 pm
by guigue
17/09 21:03:34.708 main]: Setting unicable adapter 1 slot 1 freq 1210 pin -1
[17/09 21:03:34.708 main]: Setting unicable adapter 2 slot 2 freq 1420 pin -1
[17/09 21:03:34.708 main]: Setting unicable adapter 2 slot 2 freq 1680 pin -1
[17/09 21:03:34.708 main]: Setting unicable adapter 3 slot 3 freq 2040 pin -1
[17/09 21:03:34.709 main]: Setting unicable adapter 4 slot 4 freq 970 pin -1
[17/09 21:03:34.709 main]: Setting unicable adapter 5 slot 5 freq 1030 pin -1
[17/09 21:03:34.709 main]: Setting unicable adapter 6 slot 6 freq 10900 pin -1
[17/09 21:03:34.709 main]: Setting unicable adapter 7 slot 7 freq 1150 pin -1
[17/09 21:03:34.709 main]: Setting master adapter 0 for adapter 1
[17/09 21:03:34.709 main]: Setting master adapter 0 for adapter 2
[17/09 21:03:34.709 main]: Setting master adapter 0 for adapter 3
[17/09 21:03:34.709 main]: Setting master adapter 0 for adapter 4
[17/09 21:03:34.709 main]: Setting master adapter 0 for adapter 5
[17/09 21:03:34.709 main]: Setting master adapter 0 for adapter 6
[17/09 21:03:34.709 main]: Setting master adapter 0 for adapter 7
[17/09 21:03:34.709 main]: minisatip version 0.7.16, compiled with s2api version: 050B
[17/09 21:03:34.709 main]: Built with dvbcsa
[17/09 21:03:34.709 main]: Built without CI
[17/09 21:03:34.709 main]: Built with dvbapi
[17/09 21:03:34.709 main]: Built with AES (OpenSSL)
[17/09 21:03:34.710 main]: Built with tables processing
[17/09 21:03:34.710 main]: Built with pmt processing
[17/09 21:03:34.710 main]: Built with satip client
[17/09 21:03:34.710 main]: Built with linux dvb client
[17/09 21:03:34.710 main]: Built with backtrace
[17/09 21:03:34.710 main]: Built without netceiver
[17/09 21:03:34.710 main]: Built without ddci
[17/09 21:03:34.710 main]: Built without t2mi
[17/09 21:03:34.710 main]: New UDP socket 3 bound to 0.0.0.0:1900
[17/09 21:03:34.710 main]: setting multicast for 239.255.255.250
[17/09 21:03:34.710 main]: New UDP socket 4 bound to 239.255.255.250:1900 (mcast:239.255.255.250)
[17/09 21:03:34.710 main]: tcp_listen: failed: bind() on address: ANY, port 554 : error Address already in use

Re: FBC on vuplus uno4k se.... Again

Posted: Wed Sep 18, 2019 12:48 am
by cata
This means another minisatip is running already

Re: FBC on vuplus uno4k se.... Again

Posted: Thu Sep 19, 2019 8:49 am
by guigue
This is the real log, sorry

Re: FBC on vuplus uno4k se.... Again

Posted: Thu Sep 19, 2019 6:29 pm
by cata
I think you need to upload both minisatip and enigma logs to see what is going on.

minisatip just gets the stream from enigma which seems to have continuity errors.

You could also try to run minisatip standalone.