How to setup CI+ with minisatip?

Support forum for minisatip
retrofan

How to setup CI+ with minisatip?

Post by retrofan » Sat Sep 28, 2019 12:20 pm

Hi! Did you guys get minisatip work with CI+ interface of your Enigma2 receiver? Enigma2 does the decryption in hardware and sends it back to minisatip. I also would like to test it, but until now only unencrypted channels do work.
Last year I tested minisatip succesfully with CI+ but now it doesn't work anymore. I don't know why. In Enigma2 CI+ still works fine.
I see the sources of minisatip do mention CI+, so prabably it should work somehow?
Maybe I have to enter a parameter in commandline of minisatip? CI+ is already part of the binaries as far as I know.
Last edited by retrofan on Sat Sep 28, 2019 4:45 pm, edited 1 time in total.

retrofan

Re: How to setup CI+ with minisatip?

Post by retrofan » Sat Sep 28, 2019 4:45 pm

You may also send me a PM.

cata
Site Admin
Posts: 568
Joined: Tue May 12, 2015 1:01 am

Re: How to setup CI+ with minisatip?

Post by cata » Sat Sep 28, 2019 11:15 pm

Minisatip cannot work with a CAM on enigma2 due to the fact that the API are not provided thru the linux dvb api.

As a result the only way do access CI is by using rtsp server in enigma2: https://www.opena.tv/openatv-6-2-image- ... post336758

retrofan

Re: How to setup CI+ with minisatip?

Post by retrofan » Sun Sep 29, 2019 5:53 am

Okay thanks.
And what about certificates?
Maybe those are missing now and that's the reason it doesn't work?
Last edited by retrofan on Sun Sep 29, 2019 8:19 am, edited 1 time in total.

cata
Site Admin
Posts: 568
Joined: Tue May 12, 2015 1:01 am

Re: How to setup CI+ with minisatip?

Post by cata » Sun Sep 29, 2019 7:00 am

If enigma2 works with CI+ channels minisatip shouls work too.

retrofan

Re: How to setup CI+ with minisatip?

Post by retrofan » Sun Sep 29, 2019 8:25 am

Good to know, but it still doesn't work. CI+ in Enigma2 works fine, but not with minisatip latest binary.

Or maybe other people do know what I'm doing wrong... please let me know. Thanks.
Last edited by retrofan on Sat Oct 19, 2019 3:46 pm, edited 2 times in total.

dorinilut
Posts: 6
Joined: Tue Aug 28, 2018 8:10 am

Re: How to setup CI+ with minisatip?

Post by dorinilut » Wed Oct 02, 2019 9:41 am

I also have the same issue. Never managed to get it to work with coded channels. As stated by retrofan I can watch encrypted channels via enigma2 but when I try streaming via tvheadend they come in as encrypted. This is on a Vu+ Duo2 with DVB-C tuners. I am also totally unsure on what flags to use to launch the whole thing. Any help would be really appreciated.

cata
Site Admin
Posts: 568
Joined: Tue May 12, 2015 1:01 am

Re: How to setup CI+ with minisatip?

Post by cata » Sat Oct 05, 2019 8:30 pm

Can you upload minisatip logs? (add -l http -f )

retrofan

Re: How to setup CI+ with minisatip?

Post by retrofan » Thu Oct 10, 2019 3:45 pm

@cata: Do we have to install libraries as well for CI+ on OpenATV 6.2 / 6.3?
Last edited by retrofan on Sat Oct 19, 2019 3:44 pm, edited 1 time in total.

9000h
Posts: 65
Joined: Tue May 12, 2015 1:49 pm

Re: How to setup CI+ with minisatip?

Post by 9000h » Thu Oct 10, 2019 4:51 pm

Hi,
for CI support "libdvben50221 libdvbapi libucsi" is needed if you have a look in the Makefile.
CU
9000h

Post Reply