Gigablue UE4k Problem

Support forum for minisatip
Post Reply
johnjay
Posts: 4
Joined: Sat Nov 02, 2019 9:51 am

Gigablue UE4k Problem

Post by johnjay » Sat Nov 02, 2019 11:52 am

Hello, I'm new to this forum.
First and foremost I would like to say that I have been following this forum for some time. Great work is done here. I have a problem with my Giga Blue UE4K.
I do not get it running as SatIP server.
I also have a Digibit R1 along with the Minisatip firmware running, works perfectly.
My Gigablue has DVB-S2 FBC tuner, six are enabled via Unicable, and two DVB-C tuners are also running.
My LNB is from Opticum Red Robust Legacy Unicable 2 SCR 2 LNB / 8 + 2 subscribers.
But with no start command I got it to work. Can someone help me with this?
thanks

cata
Site Admin
Posts: 568
Joined: Tue May 12, 2015 1:01 am

Re: Gigablue UE4k Problem

Post by cata » Sat Nov 02, 2019 6:44 pm

Run: ./minisatip -f -l http

And sent the output

johnjay
Posts: 4
Joined: Sat Nov 02, 2019 9:51 am

Re: Gigablue UE4k Problem

Post by johnjay » Sat Nov 02, 2019 7:08 pm

Hello cata,
Thank you for helping me. Below are the log data:

Using username "root".
root@gbue4k:~# minisatip -f -l http
[02/11 19:58:37.771 main]: Setting master adapter 0 for adapter 2
[02/11 19:58:37.771 main]: Setting master adapter 0 for adapter 3
[02/11 19:58:37.771 main]: Setting master adapter 0 for adapter 4
[02/11 19:58:37.771 main]: Setting master adapter 0 for adapter 5
[02/11 19:58:37.771 main]: Setting master adapter 0 for adapter 6
[02/11 19:58:37.772 main]: Setting master adapter 0 for adapter 7
[02/11 19:58:37.772 main]: minisatip version 0.7.16, compiled with s2api version: 050B
[02/11 19:58:37.772 main]: Built with dvbcsa
[02/11 19:58:37.772 main]: Built without CI
[02/11 19:58:37.772 main]: Built with dvbapi
[02/11 19:58:37.772 main]: Built with AES (OpenSSL)
[02/11 19:58:37.772 main]: Built with tables processing
[02/11 19:58:37.772 main]: Built with pmt processing
[02/11 19:58:37.772 main]: Built with satip client
[02/11 19:58:37.772 main]: Built with linux dvb client
[02/11 19:58:37.772 main]: Built with backtrace
[02/11 19:58:37.772 main]: Built without netceiver
[02/11 19:58:37.772 main]: Built without ddci
[02/11 19:58:37.772 main]: Built without t2mi
[02/11 19:58:37.772 main]: New UDP socket 3 bound to 0.0.0.0:1900
[02/11 19:58:37.772 main]: setting multicast for 239.255.255.250
[02/11 19:58:37.772 main]: New UDP socket 4 bound to 239.255.255.250:1900 (mcast:239.255.255.250)
[02/11 19:58:37.772 main]: tcp_listen: failed: bind() on address: ANY, port 554 : error Address already in use
root@gbue4k:~# root@gbue4k:~#

cata
Site Admin
Posts: 568
Joined: Tue May 12, 2015 1:01 am

Re: Gigablue UE4k Problem

Post by cata » Sat Nov 02, 2019 7:38 pm

You have already minisatip running.

killall minisatip

johnjay
Posts: 4
Joined: Sat Nov 02, 2019 9:51 am

Re: Gigablue UE4k Problem

Post by johnjay » Sat Nov 02, 2019 7:43 pm

I will try it without Digibit R1, which runs as the main server.
I report after my attempt.

thanks

johnjay
Posts: 4
Joined: Sat Nov 02, 2019 9:51 am

Re: Gigablue UE4k Problem

Post by johnjay » Sat Nov 02, 2019 8:09 pm

Hello cata,
still the same problem.
Have the digibit
killed, but still no connection to the server. I see the tuners but there are no channels.
I then rebooted the router.
I attach the current log.
thanks

Using username "root".
root@gbue4k:~# minisatip -f -l http
[02/11 21:07:54.983 main]: Setting master adapter 0 for adapter 2
[02/11 21:07:54.984 main]: Setting master adapter 0 for adapter 3
[02/11 21:07:54.984 main]: Setting master adapter 0 for adapter 4
[02/11 21:07:54.985 main]: Setting master adapter 0 for adapter 5
[02/11 21:07:54.985 main]: Setting master adapter 0 for adapter 6
[02/11 21:07:54.985 main]: Setting master adapter 0 for adapter 7
[02/11 21:07:54.985 main]: minisatip version 0.7.16, compiled with s2api version: 050B
[02/11 21:07:54.985 main]: Built with dvbcsa
[02/11 21:07:54.985 main]: Built without CI
[02/11 21:07:54.985 main]: Built with dvbapi
[02/11 21:07:54.986 main]: Built with AES (OpenSSL)
[02/11 21:07:54.986 main]: Built with tables processing
[02/11 21:07:54.986 main]: Built with pmt processing
[02/11 21:07:54.986 main]: Built with satip client
[02/11 21:07:54.986 main]: Built with linux dvb client
[02/11 21:07:54.986 main]: Built with backtrace
[02/11 21:07:54.986 main]: Built without netceiver
[02/11 21:07:54.986 main]: Built without ddci
[02/11 21:07:54.986 main]: Built without t2mi
[02/11 21:07:54.986 main]: New UDP socket 3 bound to 0.0.0.0:1900
[02/11 21:07:54.986 main]: setting multicast for 239.255.255.250
[02/11 21:07:54.987 main]: New UDP socket 4 bound to 239.255.255.250:1900 (mcast:239.255.255.250)
[02/11 21:07:54.987 main]: tcp_listen: failed: bind() on address: ANY, port 554 : error Address already in use

Post Reply