Problem with no signal Gigablue UHD UE 4K
Posted: Wed Mar 04, 2020 5:42 pm
Hello,
i have installed minisatip on my GigaBlue UHD UE 4K with "opkg update" and "opkg install minisatip".
After that I started the scipt with "/etc/init.d/minisatip start"
The webif at IP:8080 shows all the 7 tuners of the reciever. The problem is that my panasonic tv and an app on my phone doesn't find channels.
The webif show access by the Ip adress of the sat ip client but there is no signal in the table. str snr stock at 0%.
This is the output from "minisatip -f -l http"
i have installed minisatip on my GigaBlue UHD UE 4K with "opkg update" and "opkg install minisatip".
After that I started the scipt with "/etc/init.d/minisatip start"
The webif at IP:8080 shows all the 7 tuners of the reciever. The problem is that my panasonic tv and an app on my phone doesn't find channels.
The webif show access by the Ip adress of the sat ip client but there is no signal in the table. str snr stock at 0%.
This is the output from "minisatip -f -l http"
Code: Select all
[04/03 18:41:08.003 main]: Setting master adapter 0 for adapter 2
[04/03 18:41:08.004 main]: Setting master adapter 0 for adapter 3
[04/03 18:41:08.004 main]: Setting master adapter 0 for adapter 4
[04/03 18:41:08.004 main]: Setting master adapter 0 for adapter 5
[04/03 18:41:08.004 main]: Setting master adapter 0 for adapter 6
[04/03 18:41:08.004 main]: Setting master adapter 0 for adapter 7
[04/03 18:41:08.004 main]: minisatip version 0.7.16, compiled with s2api version: 050B
[04/03 18:41:08.004 main]: Built with dvbcsa
[04/03 18:41:08.004 main]: Built without CI
[04/03 18:41:08.004 main]: Built with dvbapi
[04/03 18:41:08.004 main]: Built with AES (OpenSSL)
[04/03 18:41:08.004 main]: Built with tables processing
[04/03 18:41:08.004 main]: Built with pmt processing
[04/03 18:41:08.004 main]: Built with satip client
[04/03 18:41:08.004 main]: Built with linux dvb client
[04/03 18:41:08.004 main]: Built with backtrace
[04/03 18:41:08.004 main]: Built without netceiver
[04/03 18:41:08.004 main]: Built without ddci
[04/03 18:41:08.004 main]: Built without t2mi
[04/03 18:41:08.005 main]: New UDP socket 3 bound to 0.0.0.0:1900
[04/03 18:41:08.005 main]: setting multicast for 239.255.255.250
[04/03 18:41:08.005 main]: New UDP socket 4 bound to 239.255.255.250:1900 (mcast:239.255.255.250)
[04/03 18:41:08.005 main]: tcp_listen: failed: bind() on address: ANY, port 554 : error Address already in use