Can you stop enigma2 and start minisatip with:
./minisatip -f -l http
And check how the things are this way
HOW TO: minisatip on openatv
Re: HOW TO: minisatip on openatv
Hi cata,
sorry for the late response...
i stop Enigma with init 4 and start minisat with
result: Web-Inteface ok, no streams works, log find attached. After a reboot enigma2 shows all streams without any problems.
Information: the same behavior under openATV 7.0 PY3.9/OpenSSL 1.1.1 (Beta)
sorry for the late response...
i stop Enigma with init 4 and start minisat with
Code: Select all
minisatip -R /usr/share/minisatip/html -l http
Information: the same behavior under openATV 7.0 PY3.9/OpenSSL 1.1.1 (Beta)
- Attachments
-
- minisatip.7z
- (16.27 KiB) Downloaded 745 times
Re: HOW TO: minisatip on openatv
Hi cata!
I try minisatip on Zgemma H2S OpenATV 6.4 pyton2
Install with command:
next I install satip-client from plugin program.
and here I am stuck
I run:
and
Activate in SAT>IP Client minisatip :
-Virtual Tuner 0
-Virtual Tuner 1 and reboot receiver when I save configuration
After reboot the SAT>IP Client not work.
I run "minisatip -N --satip-xml http://127.0.0.1:8554 -R /usr/share/minisatip/html"
and in SAT>IP Client I must discover again virtual tuner and the web browser work again but it looks different and is offline Tuner C configuration
I activate virtual Tuner C
Configuration mode: Simple
Mode: Individual
Satellite: 0.8W KU-band Thor 5/6/7 & Intelsat 10-02
Can you help me?
Where did I go wrong?
I try minisatip on Zgemma H2S OpenATV 6.4 pyton2
Install with command:
Code: Select all
opkg install minisatip
and here I am stuck
I run:
Code: Select all
echo 'ps ax | grep minisatip | grep -v grep | grep -v tail || /usr/bin/minisatip -R /usr/share/minisatip/html/' >> /etc/cron/crontabs/root
Code: Select all
minisatip -N --satip-xml http://127.0.0.1:8554 -R /usr/share/minisatip/html
-Virtual Tuner 0
-Virtual Tuner 1 and reboot receiver when I save configuration
After reboot the SAT>IP Client not work.
I run "minisatip -N --satip-xml http://127.0.0.1:8554 -R /usr/share/minisatip/html"
and in SAT>IP Client I must discover again virtual tuner and the web browser work again but it looks different and is offline Tuner C configuration
I activate virtual Tuner C
Configuration mode: Simple
Mode: Individual
Satellite: 0.8W KU-band Thor 5/6/7 & Intelsat 10-02
Can you help me?
Where did I go wrong?
Last edited by adisah13 on Fri Nov 05, 2021 6:41 pm, edited 1 time in total.
Re: HOW TO: minisatip on openatv
Hi,
I am not sure if the freq that you selected exists on 0.8W.
rtsp://192.168.1.101:554/?src=1&freq=11954&pol=h&ro=0.35&msys=dvbs&mtype=qpsk&plts=off&sr=27500&fec=34
If you are referring to 11958 try:
rtsp://192.168.1.101:554/?src=1&freq=11958&pol=h&msys=dvbs&mtype=qpsk&sr=28000&pids=..... (fill ... with the axctual pids)
https://www.lyngsat.com/Thor-5-6-7-and- ... 10-02.html
I am not sure if the freq that you selected exists on 0.8W.
rtsp://192.168.1.101:554/?src=1&freq=11954&pol=h&ro=0.35&msys=dvbs&mtype=qpsk&plts=off&sr=27500&fec=34
If you are referring to 11958 try:
rtsp://192.168.1.101:554/?src=1&freq=11958&pol=h&msys=dvbs&mtype=qpsk&sr=28000&pids=..... (fill ... with the axctual pids)
https://www.lyngsat.com/Thor-5-6-7-and- ... 10-02.html