Has anybody got the Telestar Digitbit R1 pointing to a DVB-S2X stream?
Now I may be completely mistaken but DVB-S2X and PLS and DVB-S2 Multistream are all the same. Right?
According to this issue on the Github repository of the alternative firmware for the Digibit R1: satip-axe, then the hardware and firmware support it.
https://github.com/perexg/satip-axe/issues/126
My intention is to point a dish to 5W and get the unencrypted TNT Sat channels which are transmitted in DVB-S2X.
Am I along the right lines or not?
Cheers,
Fergycool
Digibit R1 > 5W - DVB-S2X?
Re: Digibit R1 > 5W - DVB-S2X?
Well I bought a new dish, pointed it at 5W... and now I cannot get SATIP-AXE to boot. The Digibit R1 boots fine with the stock firmware, but that does not support multistream. But the SATIP-AXE boots with the flashing LEDs, but will not acquire an IP address. Iv'e tried multiple hardware resets. Multiple USB sticks and all fail.
Re: Digibit R1 > 5W - DVB-S2X?
Just wondered if anybody had any experience with satip-axe, the Digibit R1 and DVB-S2X/PLS multi streams? Specifically the Fransat channels on 5W.
Thanks!
Thanks!