~ # killall minisatip7
~ # /sbin/minisatip7 -f -l -l -l -7 0:1,0:2,0:3 -L *:9750-10600-11700
[16/06 10:28:57.390]: Setting adapter 0 as master for adapter 1
[16/06 10:28:57.390]: Setting adapter 0 as master for adapter 2
[16/06 10:28:57.390]: Setting adapter 0 as master for adapter 3
[16/06 10:28:57.390]: Setting diseqc adapter -1 lnb_low 9750000 lnb_high 10600000 lnb_switch 11700000
[16/06 10:28:57.392]: minisatip version 0.7.4-axe201, compiled with s2api version: 0501
[16/06 10:28:57.392]: Built without dvbcsa
[16/06 10:28:57.392]: Built without CI
[16/06 10:28:57.392]: Built with dvbapi
[16/06 10:28:57.392]: Built without AES (OpenSSL)
[16/06 10:28:57.392]: Built with tables processing
[16/06 10:28:57.392]: Built with satip client
[16/06 10:28:57.392]: Built with linux dvb client
[16/06 10:28:57.392]: Built with backtrace
[16/06 10:28:57.392]: Built without netceiver
[16/06 10:28:57.393]: Built for satip-axe
[16/06 10:28:57.394]: New UDP socket 3 bound to 0.0.0.0:1900
[16/06 10:28:57.394]: setting multicast for 239.255.255.250
[16/06 10:28:57.394]: New UDP socket 4 bound to 239.255.255.250:1900
[16/06 10:28:57.395]: tcp_listen: failed: bind() on address: ANY, port 554 : error Address already in use
[16/06 10:28:57.395]: RTSP: Could not listen on port 554
cata wrote: ↑Sat Jun 17, 2017 8:46 am
Can you check the lnb settings of the dvb app that works?
What do you mean? I´m using the Digibit R1 with tvheadend. You mean the configuration of tvheadend?
What cointry are you in? Are you using circular polarity?
I live in Spain. And not 100% sure but in my building there is an Universal LNB oriented to 19,2ºE which is distributed to all houses only the polarization Vertical Low.