minisatip binaries
Re: minisatip binaries
Driver/hardware
Re: minisatip binaries
Okay, too bad, but not a major problem as I get the needed PIDs with a channelscan. This way I also don't have unneccessary network traffic as the PIDs are filtered.
Now my wish list is very short: mips binary CI+ support in the near future and then I'm very happy!
Good luck with your project and keep up the great work!
Now my wish list is very short: mips binary CI+ support in the near future and then I'm very happy!
Good luck with your project and keep up the great work!
Re: minisatip binaries
Hi Catalin,
Just curious: when do you expect to have a build ready with CI plus implemented for Gigablue etc?
Thanks
Just curious: when do you expect to have a build ready with CI plus implemented for Gigablue etc?
Thanks
Re: minisatip binaries
Hi,
it might take some time, probably will start on DDCI once the 0.7-ca is stable.
Thanks
it might take some time, probably will start on DDCI once the 0.7-ca is stable.
Thanks
Re: minisatip binaries
Just wanted to say thanks for this nice software!
minisatip_mips_gigablue_dvbcsa.zip works great on my DM8000 and 2 DVB-S2 tuners, its now connected to tvheadend and gives me perfect IPTV at home. (no need to have coax-cable all over the house anymore)
Will donate asap, looking forward to test the CI+ implementations! (waiting for a cam I ordered)
Best regards
Magnus
minisatip_mips_gigablue_dvbcsa.zip works great on my DM8000 and 2 DVB-S2 tuners, its now connected to tvheadend and gives me perfect IPTV at home. (no need to have coax-cable all over the house anymore)
Will donate asap, looking forward to test the CI+ implementations! (waiting for a cam I ordered)
Best regards
Magnus
Re: minisatip binaries
Hi cata,
Sometimes the binaries are updated. Where can we find the changelog?
Thanks
Sometimes the binaries are updated. Where can we find the changelog?
Thanks
Re: minisatip binaries
Hi,
The binaries are based on the 0.7-ca branch. You can find a link with the latest commits here:
https://github.com/catalinii/minisatip/tree/0.7-ca
Thanks
The binaries are based on the 0.7-ca branch. You can find a link with the latest commits here:
https://github.com/catalinii/minisatip/tree/0.7-ca
Thanks
Re: minisatip binaries
Hello,
I want to use minisatip in mi router, it use LEDE firmware: http://downloads.lede-project.org/relea ... ps/mt7620/
There are some files that I think we could use to compile it:
lede-imagebuilder-17.01.2-ramips-mt7620.Linux-x86_64.tar.xz
lede-sdk-17.01.2-ramips-mt7620_gcc-5.4.0_musl-1.1.16.Linux-x86_64.tar.xz
I think that the device could run without problems:
CPU: MIPS @580MHz
RAM: 128MB
Could you help on how to compile it?
Best regards.
I want to use minisatip in mi router, it use LEDE firmware: http://downloads.lede-project.org/relea ... ps/mt7620/
There are some files that I think we could use to compile it:
lede-imagebuilder-17.01.2-ramips-mt7620.Linux-x86_64.tar.xz
lede-sdk-17.01.2-ramips-mt7620_gcc-5.4.0_musl-1.1.16.Linux-x86_64.tar.xz
I think that the device could run without problems:
CPU: MIPS @580MHz
RAM: 128MB
Could you help on how to compile it?
Best regards.
Re: minisatip binaries
Hi,
Did u try the openwrt binary?
The crosscompiler used is ar71xx mips lede.
Thanks
Did u try the openwrt binary?
The crosscompiler used is ar71xx mips lede.
Thanks