minisatip binaries
-
- Posts: 25
- Joined: Fri Dec 15, 2017 10:07 am
Re: minisatip binaries
@seal: maybe you should test it first with dvbviewer. If you test it with panasonic you have to restart minisatip after every change.
Re: minisatip binaries
@Friedlinghaus: i tried with TVHeadend - the same but when i trying to descrable on TVH - it the same - in oscam descrambling works or in newcamd but i have black screen. Some of stream goes too - i have network traffic it looks like unencrypted...
Re: minisatip binaries
With sh4 (at least in my experience ) you need to desceamvle with minisatip and -o /tmp/camd.socket otherwise it won't work. Forget descrambling in tvh or dvbviewer
Re: minisatip binaries
Now after few tries its works for some time and picture freeze.
Logs attached.
part of oscam oscam.conf:
[dvbapi]
enabled = 1
au = 1
pmt_mode = 1
user = dvbapi
strange - that was one channel but so much in log in oscam... from enigma this looks not that same.
Logs attached.
part of oscam oscam.conf:
[dvbapi]
enabled = 1
au = 1
pmt_mode = 1
user = dvbapi
strange - that was one channel but so much in log in oscam... from enigma this looks not that same.
-
- Posts: 25
- Joined: Fri Dec 15, 2017 10:07 am
Re: minisatip binaries
Hi cata,
I'm doing some tests with Mutant HD51 4K (arm) and panasonic TV. Mutant has two tuners DVB-S2 and DVB-C/T2. When I run minisatip
ordinary way then panasonic detect sat>ip server with all S2,C,T tuners but when I try tune channels then panasonics offers just
DVB-S2 for tuning. It doesn't matter if manual or automatic search.
What parametrs should I define in order to get DVB-T for channel searching as well.
Is it --dmx-source ADAPTER1:FRONTENDX ?
To be honest, in fact I don't understat what this parametr means exactly..
Thanks in advance.
I'm doing some tests with Mutant HD51 4K (arm) and panasonic TV. Mutant has two tuners DVB-S2 and DVB-C/T2. When I run minisatip
ordinary way then panasonic detect sat>ip server with all S2,C,T tuners but when I try tune channels then panasonics offers just
DVB-S2 for tuning. It doesn't matter if manual or automatic search.
What parametrs should I define in order to get DVB-T for channel searching as well.
Is it --dmx-source ADAPTER1:FRONTENDX ?
To be honest, in fact I don't understat what this parametr means exactly..
Thanks in advance.
Re: minisatip binaries
Hi,
it's not a minisatip issue, the Panasonic did not allow to mix DVB-S and other DVB like T or C (also not via regular antenna).
CU
9000h
it's not a minisatip issue, the Panasonic did not allow to mix DVB-S and other DVB like T or C (also not via regular antenna).
CU
9000h
Last edited by 9000h on Mon Dec 25, 2017 2:24 pm, edited 1 time in total.
-
- Posts: 25
- Joined: Fri Dec 15, 2017 10:07 am
Re: minisatip binaries
Oh, I see, thank you.
Can I just use DVB-T tuner without the DVB-S2? Let's say with -e parameter?
Edit: Yes, with parameter -e 1 DVB-C/T/T2 runs but searching channels on panasonic takes 1 hour..
Can I just use DVB-T tuner without the DVB-S2? Let's say with -e parameter?
Edit: Yes, with parameter -e 1 DVB-C/T/T2 runs but searching channels on panasonic takes 1 hour..
Re: minisatip binaries
Hi,
I have test the binarie with a Octagon SF1008HD SE (DVB-S2) using HDMU Enigma2 and bpanther Neutrino images.
I can confirm the problems with HD channels. But I found out that the SD channels with H264 coded also not work.
Is there a solution for this?
I have test the binarie with a Octagon SF1008HD SE (DVB-S2) using HDMU Enigma2 and bpanther Neutrino images.
I can confirm the problems with HD channels. But I found out that the SD channels with H264 coded also not work.
Is there a solution for this?
Re: minisatip binaries
Hi, what peoblems do u have?
Re: minisatip binaries
With the SH4 binarie SD-Channels work well, but I can't view any HD-Channel or SD-Channels with H264 codec. With Enigma2 or Neutrino all channels work. For minisatip I tested Tvheadend and DVBViewer.