Hi,
I have test the binarie from cata with a Octagon SF1008HD SE (DVB-S2) using HDMU Enigma2 and bpanther Neutrino images.
With the SH4 binarie SD-Channels work well, but I can't view any HD-Channel or SD-Channels with H264 codec. With Enigma2 or Neutrino all channels work. I tested it Tvheadend and DVBViewer.
Logs like cata has requested here are attached.
Tvheadend shows:
- satip: SAT>IP DVB-S Tuner #1 - RTSP cmd error 7 (Unbekannter Fehler -7) [8-404]
- subscription: 058B: service instance is bad, reason: Tuning failed
minisatip problems with HD-Channels on sh4 Box
minisatip problems with HD-Channels on sh4 Box
- Attachments
-
- minisatip.zip
- (4.05 KiB) Downloaded 362 times
Re: minisatip problems with HD-Channels on sh4 Box
Hi
I had the same issue.
Add -Y 0:dvbs2
My receiver also did not report dvbs2 as delivery system but supports it.
Thanks
I had the same issue.
Add -Y 0:dvbs2
My receiver also did not report dvbs2 as delivery system but supports it.
Thanks
Re: minisatip problems with HD-Channels on sh4 Box
Now it works
Big Thanks...
I have further question. You wrote here about oscam on sh4.
Can you tell me why descrambling not work with Tvheadend?
In the satip-axe firmware from perexg for the Telestar Digibit R1 it works and he used also minisatip as server.
Big Thanks...
I have further question. You wrote here about oscam on sh4.
Can you tell me why descrambling not work with Tvheadend?
In the satip-axe firmware from perexg for the Telestar Digibit R1 it works and he used also minisatip as server.
Re: minisatip problems with HD-Channels on sh4 Box
My experience is that for descrambling you need oscam in local mode (as the one configured for enigma) and you need also for minisatip to connect to it using local socket (-o /tmp/camd.socket). This is the only way it works for me but the advantage is that you can decrypt multiple channels from the same TP.