MCD / MTD support using DD hardware
-
- Posts: 2
- Joined: Mon Aug 14, 2017 12:55 pm
Re: MCD / MTD support using DD hardware
any news here?
-
- Posts: 2
- Joined: Tue Jul 25, 2017 8:41 pm
Re: MCD / MTD support using DD hardware
It would be very nice... I also use DD hardware!
Maybe we get a christmas present?
Maybe we get a christmas present?
Re: MCD / MTD support using DD hardware
Just want to ask for the latest news/update about DDCI hardware?
Is there something ready to test, I've seen DDCI=0 and DDCI_TEST=0 in the makefile.
I did already some tests with several combinations, but without any success.
Are there special settings/configurations to do, for getting anything running with DDCI hardware?
Would be nice, to get some infos about it...
Thank you - Carter
Is there something ready to test, I've seen DDCI=0 and DDCI_TEST=0 in the makefile.
I did already some tests with several combinations, but without any success.
Are there special settings/configurations to do, for getting anything running with DDCI hardware?
Would be nice, to get some infos about it...
Thank you - Carter
Re: MCD / MTD support using DD hardware
I am still testing, but basically if you have the hardware DDCI=1 and DDCI_TEST=0.
Re: MCD / MTD support using DD hardware
Currently I'm using a DD-CineS2 V6.5 with a connected Octopus flex CI (via bus cable).
Linux recognises /dev/dvb/adapter[0...3] with S2 adapter devices in /dev/dvb/adapter[0,1]/..., and ca0 and ci0 in each /dev/dvb/adapter[2,3]/...
In adapter /dev/dvb/adapter2/ is a ACL2.2 plugged in.
After starting, I only get messages like these:
I have two interfaces in /dev/dvb/adapter2/ca0 and ci0 and /dev/dvb/adapter3/ca0 and ci0
My CAM is connected to adapter2
No log entry occurs from them...
(FYI, my smartdcard/CI/CAM are working together on the same machine/OS, when running vdr and DDCI2 plugin)
--> Which Digital Devices driver version / kernel combination are you using?
UPDATE:
I'm using kernel 4.8.0-53 and the latest device drivers from DD Release-0.9.33
Linux recognises /dev/dvb/adapter[0...3] with S2 adapter devices in /dev/dvb/adapter[0,1]/..., and ca0 and ci0 in each /dev/dvb/adapter[2,3]/...
In adapter /dev/dvb/adapter2/ is a ACL2.2 plugged in.
After starting, I only get messages like these:
Code: Select all
[03/06 10:37:16.449 AD0]: Starting select_and_execute on thread ID f1482700, thread_name AD0
[03/06 10:37:16.449 main]: No CA device detected on adapter 0: file /dev/dvb/adapter0/ca0
[03/06 10:37:16.461 AD1]: Starting select_and_execute on thread ID f0c81700, thread_name AD1
[03/06 10:37:16.461 main]: No CA device detected on adapter 1: file /dev/dvb/adapter1/ca0
My CAM is connected to adapter2
No log entry occurs from them...
(FYI, my smartdcard/CI/CAM are working together on the same machine/OS, when running vdr and DDCI2 plugin)
--> Which Digital Devices driver version / kernel combination are you using?
UPDATE:
I'm using kernel 4.8.0-53 and the latest device drivers from DD Release-0.9.33
Re: MCD / MTD support using DD hardware
Can you upload the entire log?
Re: MCD / MTD support using DD hardware
--> starting minisatip with this command:
TV is running "Das Erste"
then switching over to:
1. Station: SYFY
2. Station: RTL Crime
3. Station: n-tv HD
4. Station. "Das Erste HD"
Both CI slots are supplied with an ACL R2.2 (working cards are inserted)
Entire log is attached.
Code: Select all
./minisatip -t -x 8016 --document-root /usr/share/minisatip-dvbapi/html -l3
then switching over to:
1. Station: SYFY
2. Station: RTL Crime
3. Station: n-tv HD
4. Station. "Das Erste HD"
Both CI slots are supplied with an ACL R2.2 (working cards are inserted)
Entire log is attached.
- Attachments
-
- minisatip.tgz
- (210.47 KiB) Downloaded 385 times
Re: MCD / MTD support using DD hardware
BTW:
Are there any add. plans to get access to the CAM menu, via WebIf?
-carter
Are there any add. plans to get access to the CAM menu, via WebIf?
-carter
Re: MCD / MTD support using DD hardware
...any further instructions?
...any - yet unknown - commandline parameters for DDCI to get it working?
-carter
BTW: I've also tested commit 664 "do not timeout ddci adapter"
...any - yet unknown - commandline parameters for DDCI to get it working?
-carter
BTW: I've also tested commit 664 "do not timeout ddci adapter"
Re: MCD / MTD support using DD hardware
Please set in src/Makefile:
DDCI=1
make clean
make
./minisatip -f -l http,ca -v ca | tee /tmp/log
You should see something like this in the log:
[17/06 00:21:24.737 main]: DDCI opening [2] adapter 2 and frontend 0
[17/06 00:21:24.737 main]: opened DDCI adapter 2 fe:11 dvr:12
[17/06 00:21:24.737 main]: deleting pids on adapter 2, sid -1, pids=NULL
[17/06 00:21:24.737 main]: Mutex init 0x55af3e275758
[17/06 00:21:24.737 main]: sockets_add: handle 12 (type 5) returning socket index 9 [0.0.0.0:0] read: 0x55af3d786e4b
[17/06 00:21:24.737 main]: set_socket_thread: thread 23fff700 for sockets 9
[17/06 00:21:24.737 AD2]: Starting select_and_execute on thread ID 23fff700, thread_name AD2
[17/06 00:21:28.346 main]: initializing CA2, fd 13 type 2 flags 0x3, after 3609 ms
[17/06 00:21:28.347 main]: slotid: 0
[17/06 00:21:28.347 main]: tcid: 1
...................
[17/06 00:21:35.620 CA2]: 00:CAM successfully connected to resource 00240041, session_number 4
Then tune to a channel that your card should open, then upload the /tmp/log here
DDCI=1
make clean
make
./minisatip -f -l http,ca -v ca | tee /tmp/log
You should see something like this in the log:
[17/06 00:21:24.737 main]: DDCI opening [2] adapter 2 and frontend 0
[17/06 00:21:24.737 main]: opened DDCI adapter 2 fe:11 dvr:12
[17/06 00:21:24.737 main]: deleting pids on adapter 2, sid -1, pids=NULL
[17/06 00:21:24.737 main]: Mutex init 0x55af3e275758
[17/06 00:21:24.737 main]: sockets_add: handle 12 (type 5) returning socket index 9 [0.0.0.0:0] read: 0x55af3d786e4b
[17/06 00:21:24.737 main]: set_socket_thread: thread 23fff700 for sockets 9
[17/06 00:21:24.737 AD2]: Starting select_and_execute on thread ID 23fff700, thread_name AD2
[17/06 00:21:28.346 main]: initializing CA2, fd 13 type 2 flags 0x3, after 3609 ms
[17/06 00:21:28.347 main]: slotid: 0
[17/06 00:21:28.347 main]: tcid: 1
...................
[17/06 00:21:35.620 CA2]: 00:CAM successfully connected to resource 00240041, session_number 4
Then tune to a channel that your card should open, then upload the /tmp/log here