Hi,
deleted
CU
9000h
CI+ protocol implementation in minisatip
Re: CI+ protocol implementation in minisatip
Last edited by 9000h on Mon Jan 28, 2019 1:25 pm, edited 1 time in total.
Re: CI+ protocol implementation in minisatip
Hi,
what your source of ca.c-ci-plus?
BR,
Yuri
what your source of ca.c-ci-plus?
BR,
Yuri
Re: CI+ protocol implementation in minisatip
Hi,
actual version always in first post in this theme.
BR,
Yuri
actual version always in first post in this theme.
BR,
Yuri
Re: CI+ protocol implementation in minisatip
Hi Yuri,
did overlook that.
thanks
9000h
did overlook that.
thanks
9000h
Re: CI+ protocol implementation in minisatip
Hello!
I am trying to use a technotrend CT2-4650 CI with latest git/Yuris latest patch and the certs - the free channels are working fine (dvb-c, german unitymedia with org. modul and smartcard) but the CA0 is not working.
This is my start-command: /usr/bin/minisatip -a 0:0:1 -Y 1:dvbc -e 0 -l 0 -f -v ca
and this is what happens:
[02/05 21:19:34.131 main]: initializing CA, fd 9 type 2 flags 0x1, after 8070 ms
[02/05 21:19:34.131 main]: CA module not present or not ready
[02/05 21:19:34.132 main]: closing CA device 0, fd -1
Maybe anyone has an idea what is wrong?
I am trying to use a technotrend CT2-4650 CI with latest git/Yuris latest patch and the certs - the free channels are working fine (dvb-c, german unitymedia with org. modul and smartcard) but the CA0 is not working.
This is my start-command: /usr/bin/minisatip -a 0:0:1 -Y 1:dvbc -e 0 -l 0 -f -v ca
and this is what happens:
[02/05 21:19:34.131 main]: initializing CA, fd 9 type 2 flags 0x1, after 8070 ms
[02/05 21:19:34.131 main]: CA module not present or not ready
[02/05 21:19:34.132 main]: closing CA device 0, fd -1
Maybe anyone has an idea what is wrong?
Re: CI+ protocol implementation in minisatip
Hi,
not sure if this is still valid, but there seem to be known issues for your card cam support.
https://www.linuxtv.org/wiki/index.php/ ... T2-4650_CI
CU
9000h
not sure if this is still valid, but there seem to be known issues for your card cam support.
https://www.linuxtv.org/wiki/index.php/ ... T2-4650_CI
CU
9000h
Re: CI+ protocol implementation in minisatip
Hello 9000H!
It seems that the CAM (Nagra) has a very slow init and after a few seconds the driver stops because of a timeout... I have found a few patches on different sites but I do not know which one will solve my problem. Another problem is that I do not have another cam to test. Trying to trigger another caminit with gnutv does not fix the problem either, init simply takes to long I think ...
It seems that the CAM (Nagra) has a very slow init and after a few seconds the driver stops because of a timeout... I have found a few patches on different sites but I do not know which one will solve my problem. Another problem is that I do not have another cam to test. Trying to trigger another caminit with gnutv does not fix the problem either, init simply takes to long I think ...
Re: CI+ protocol implementation in minisatip
I have the same TT card as you, working without any problems.balou1974 wrote: ↑Sat May 04, 2019 5:32 am Hello 9000H!
It seems that the CAM (Nagra) has a very slow init and after a few seconds the driver stops because of a timeout... I have found a few patches on different sites but I do not know which one will solve my problem. Another problem is that I do not have another cam to test. Trying to trigger another caminit with gnutv does not fix the problem either, init simply takes to long I think ...
Did you install the dvb-apps package? You need libdvben50221 in order to have support for CAMS.
When you insert the CAM module into the dvb card, you should see it being detected in DMESG
Also libdvbcsa1 and libdvbcsa-dev are needed. Then compile with DVBCSA=YES
Re: CI+ protocol implementation in minisatip
Hello sardonis!
Here is my config:
./minisatip --help
minisatip version 0.7.16, compiled with s2api version: 050A
[09/05 13:59:37.482 main]: Built with dvbcsa
[09/05 13:59:37.483 main]: Built with CI
[09/05 13:59:37.483 main]: Built with dvbapi
[09/05 13:59:37.483 main]: Built with AES (OpenSSL)
[09/05 13:59:37.483 main]: Built with tables processing
[09/05 13:59:37.483 main]: Built with pmt processing
[09/05 13:59:37.483 main]: Built with satip client
[09/05 13:59:37.483 main]: Built with linux dvb client
[09/05 13:59:37.483 main]: Built with backtrace
[09/05 13:59:37.483 main]: Built without netceiver
[09/05 13:59:37.483 main]: Built without ddci
[09/05 13:59:37.483 main]: Built without t2mi
I am using an raspberry pi 3B with latest raspbian:
dvb-apps, openssl-dev, libdvbcsa-dev and libdvbcsa1 are installed
(did I miss some packets?)
And my /etc/rc.local:
./cat /etc/rc.local |grep minis
/usr/bin/minisatip -a 0:0:1 -Y 1:dvbc -e 0 -l 0
Maybe you have an idea what I am doing wrong (cam is UM CI+ and SC UM02) ...
Thanks a lot for your help!
Here is my config:
./minisatip --help
minisatip version 0.7.16, compiled with s2api version: 050A
[09/05 13:59:37.482 main]: Built with dvbcsa
[09/05 13:59:37.483 main]: Built with CI
[09/05 13:59:37.483 main]: Built with dvbapi
[09/05 13:59:37.483 main]: Built with AES (OpenSSL)
[09/05 13:59:37.483 main]: Built with tables processing
[09/05 13:59:37.483 main]: Built with pmt processing
[09/05 13:59:37.483 main]: Built with satip client
[09/05 13:59:37.483 main]: Built with linux dvb client
[09/05 13:59:37.483 main]: Built with backtrace
[09/05 13:59:37.483 main]: Built without netceiver
[09/05 13:59:37.483 main]: Built without ddci
[09/05 13:59:37.483 main]: Built without t2mi
I am using an raspberry pi 3B with latest raspbian:
dvb-apps, openssl-dev, libdvbcsa-dev and libdvbcsa1 are installed
(did I miss some packets?)
And my /etc/rc.local:
./cat /etc/rc.local |grep minis
/usr/bin/minisatip -a 0:0:1 -Y 1:dvbc -e 0 -l 0
Maybe you have an idea what I am doing wrong (cam is UM CI+ and SC UM02) ...
Thanks a lot for your help!