At my neighbor's house there is a satellite dish connected to a Digibit R1, so users can connect via LAN to receive satellite channels. This is working perfectly fine. Between our houses we have a gigabit ethernet connection, so I'm also able to connect to that Digibit R1 with my tvheadend server.
However, it's not working with my Panasonic TV, because the TV is in a different subnet than the Digibit so that broadcast messages do not get routed. This is why I installed a VM in the TV's subnet and started minisatip on that VM in the following way:
Code: Select all
minisatip -s dvbs2:1@192.168.1.15:554 -s dvbs2:2@192.168.1.15:554 -s dvbs2:3@192.168.1.15:554 -s dvbs2:4@192.168.1.15:554
However, there is one weird issue: with some channels it occasionally happens that after zapping to that channel there is a picture for about 1 second. Then the screen turns black and displays "No signal".
- This is only happening on a small number of channels (e.g. ZDF info).
- It's not happening each time I switch to such a channel, but quite often.
It would be awesome if somebody could help me on that.