HOW TO: minisatip on openatv

Support forum for minisatip
cata
Site Admin
Posts: 768
Joined: Tue May 12, 2015 1:01 am

Re: HOW TO: minisatip on openatv

Post by cata »

Can you stop enigma2 and start minisatip with:

./minisatip -f -l http

And check how the things are this way
client02
Posts: 6
Joined: Wed Aug 11, 2021 3:25 pm

Re: HOW TO: minisatip on openatv

Post by client02 »

Hi cata,
sorry for the late response...

i stop Enigma with init 4 and start minisat with

Code: Select all

minisatip -R /usr/share/minisatip/html -l http
result: Web-Inteface ok, no streams works, log find attached. After a reboot enigma2 shows all streams without any problems.

Information: the same behavior under openATV 7.0 PY3.9/OpenSSL 1.1.1 (Beta)
Attachments
minisatip.7z
(16.27 KiB) Downloaded 677 times
adisah13
Posts: 1
Joined: Fri Nov 05, 2021 2:35 pm

Re: HOW TO: minisatip on openatv

Post by adisah13 »

Hi cata!
I try minisatip on Zgemma H2S OpenATV 6.4 pyton2
Install with command:

Code: Select all

opkg install minisatip
next I install satip-client from plugin program.
and here I am stuck
I run:

Code: Select all

echo 'ps ax | grep minisatip | grep -v grep | grep -v tail || /usr/bin/minisatip -R /usr/share/minisatip/html/' >> /etc/cron/crontabs/root
and

Code: Select all

minisatip -N --satip-xml http://127.0.0.1:8554 -R /usr/share/minisatip/html
Captură de ecran de la 2021-11-05 18-48-26.png
Captură de ecran de la 2021-11-05 18-48-26.png (111.28 KiB) Viewed 12473 times
Activate in SAT>IP Client minisatip :
-Virtual Tuner 0
-Virtual Tuner 1
Captură de ecran de la 2021-11-05 18-45-10.png
Captură de ecran de la 2021-11-05 18-45-10.png (234.26 KiB) Viewed 12475 times
and reboot receiver when I save configuration
After reboot the SAT>IP Client not work.
I run "minisatip -N --satip-xml http://127.0.0.1:8554 -R /usr/share/minisatip/html"
and in SAT>IP Client I must discover again virtual tuner and the web browser work again but it looks different and is offline
Captură de ecran de la 2021-11-05 18-55-32.png
Captură de ecran de la 2021-11-05 18-55-32.png (75.18 KiB) Viewed 12475 times
Tuner C configuration
I activate virtual Tuner C
Configuration mode: Simple
Mode: Individual
Satellite: 0.8W KU-band Thor 5/6/7 & Intelsat 10-02
Can you help me?
Where did I go wrong?
Last edited by adisah13 on Fri Nov 05, 2021 6:41 pm, edited 1 time in total.
cata
Site Admin
Posts: 768
Joined: Tue May 12, 2015 1:01 am

Re: HOW TO: minisatip on openatv

Post by cata »

Hi,
I am not sure if the freq that you selected exists on 0.8W.
rtsp://192.168.1.101:554/?src=1&freq=11954&pol=h&ro=0.35&msys=dvbs&mtype=qpsk&plts=off&sr=27500&fec=34

If you are referring to 11958 try:
rtsp://192.168.1.101:554/?src=1&freq=11958&pol=h&msys=dvbs&mtype=qpsk&sr=28000&pids=..... (fill ... with the axctual pids)
https://www.lyngsat.com/Thor-5-6-7-and- ... 10-02.html
Post Reply