#150: Diseqc 1.1 support

Support forum for minisatip
catalinii
Posts: 0
Joined: Wed Nov 18, 2015 5:41 am

Post by catalinii »

Hi,

you mean there is a difference when you send just 39 or when you send 38 and 39 ?

Basically my entire question is, what needs to be implemented on the diseqc part for your switch to be working (more specifically what diseqc commands needs to be sent).

About the pid filtering, did you find a better way of doing the things ?

Thanks
TheTroll

Post by TheTroll »

A difference with just 0x39.

I need to do more tests to know .. the switching seemed ok with 0x39 only.
About pid filtering, no i did not :/

9000h
Posts: 89
Joined: Tue May 12, 2015 1:49 pm

Post by 9000h »

unfortunatly the normal diseqc is broken since VERSION_BUILD 46, but I do not have the time to look after it
catalinii
Posts: 0
Joined: Wed Nov 18, 2015 5:41 am

Post by catalinii »

I have added a new switch -d for diseqc.

By defa8ult Diseqc 1.0 works as previously, but you can change to be sent just uncommitted or just committed signals.

Please test and let me know.
9000h
Posts: 89
Joined: Tue May 12, 2015 1:49 pm

Post by 9000h »

will do so when Im back home end of August
TheTroll

Post by TheTroll »

Hey,

I tried it and there is a little typo + a misconfig of the uncmd.
here is fix:
http://pastebin.com/NEYXfPmC
9000h
Posts: 89
Joined: Tue May 12, 2015 1:49 pm

Post by 9000h »

I can confirm the default Diseqc 1.0 works as previously.
catalinii
Posts: 0
Joined: Wed Nov 18, 2015 5:41 am

Post by catalinii »

Let me know if this ok on 1.1

Thanks
TheTroll

Post by TheTroll »

Hi Catalinii,

yes with the patch it works for me!

thx
catalinii
Posts: 0
Joined: Wed Nov 18, 2015 5:41 am

Post by catalinii »

Thanks, I will close this.
Post Reply